Drifta Parts - Wheel & Brake

8cm distance between 3 stud holes which are 10mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines. OD of flange is 104mm. Height of Rear Wheel hub is 45mm 

Rear wheel hubs for Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's or ideal for any DIY project. 

Price $36.90

Front wheel hub complete with bearing.

ID of bearing is 17mm.

80mm distance between 3 stud holes which are 10mm.

These are compatible with our Front connecting arms with a 17mm shaft. OD of flange is 104mm.

Height of Front Wheel Hub is 45mm. 

Ideal for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

These are good quality one piece fittings.

Price $38.90

Bearing to suit Front wheel hub (as shown above).

The price is for 2 bearings.

Code: 6003

ID of bearing is 17mm

OD of bearing is 34mm

Price $19.90

To suit our Drifta single seater Go Kart Wheel Hubs

12 x 10mm bolts 25mm long

12 x flat washers

12 x spring washers

12 x locking nuts

Price $19.90

To suit our Drifta single seater Go Kart Wheel Hubs

3 x 10mm bolts 25mm long

3 x flat washers

3 x spring washers

3 x locking nuts

Price $6.90

High quality stainless steel plate which is 3.0mm thick.

OD is 180mm. ID of centre hole is 38mm.

Brake Plate for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our Right Hub Brake & Rear Axles.

To suit our STANDARD HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER & XTREME HYDRAULIC BRAKE UNITS.

Price $36.90

Brake Disc Plate complete with right brake hub.

High quality stainless steel plate which is 3.0mm thick.

OD is 180mm.

ID of centre hole of Brake Plate is 38mm.

Comes complete with bolts.

To suit our Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's.

Ideal for any DIY project. Compatible with our Rear Axles.

Price $67.90

25mm distance between 6 bolt holes which are 5mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines.

OD of flange is 60mm. Height of Right Hub Brake is 45mm.

Right Hub Brake for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our brake plate.  

Price $35.90

Cable operated caliper comes complete with brake pads.

Mechanical cable brake.
Suitable for 2mm brake disc plates.

Distance between mounting bracket holes centre to centre is 52mm.

Suitable for Grass Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.

Price $35.90

To suit REAR DISC BRAKE ASSEMBLY.

(Mechanical cable brake system).

Rear Disc Brake Assembly pictured above.

Please note: Some brake pads for this brake assembly are rectangular shape.

Please specify when ordering if you need the rectangular pads.

Price $10.00

To suit smaller Go Kart Hydraulic brake units. (Not Xtreme Hydraulic brake units).

(Please note: this smaller brake unit is now obsolete)

Please note: Go Kart frames starting with serial # ZJLH had this smaller brake unit.

Price $12.00

Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.

To suit butterfly steering wheels on Drifta Go Karts.

Brake hose length 140cm from caliper to handle. Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)

Easy to install, Just bolt on.

Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS... or YKHM2019...

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Price $72.90

To suit Standard Hydraulic Brake Unit Complete With Hand Lever (pictured above)

Go Kart frames starting with serial # LAKS... and YKHM2019...

(Code on brake pads YL-F328 or HMZ-7006)

Price $15.00

To suit Standard Hydraulic Brake Unit Complete with Hand Lever - LAKS serial.

Available in different colours of go karts.

Mounting holes are 40mm apart, holes drilled to suit brake caliper above.

Price $24.90

XTREME HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER
Suitable for 2.5-3mm brake disc plate.
Brake hose length 160cm from caliper to handle.
To suit brake units for Go Kart frames starting with serial # ZJLH. (These are not the standard unit for our own Drifta Go Karts with serial # LAKS... or YKHM2019... They can be used if adapted with a replacement brake bracket.)

For ZJLH... or LW-GK Drift Go Karts 2013 or older you will need a brake bracket to attach these brake units.( The original brake units on these karts are now obsolete)

These Xtreme Brake Units are ideal if you are building your own kart.

Suitable for Drift Go Karts, Grass Karts, Off Road Karts, Sliders, Carts, Drift Trikes & Trolley's. Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Comes complete with Xtreme Hydraulic Brake Pads

These brake pad codes below will fit this brake unit:

Code TL-F305

Code RH-7067

Code WF-021

Price $74.90

XTREME HYDRAULIC BRAKE UNIT COMPLETE SUITABLE FOR FOOT PEDAL

These are designed for use with Foot pedals.

Brake hose length 125cm from caliper to handle.

Comes complete with Xtreme Hydraulic Brake Pads

(Code TL-F305) or (RH-7067) or (WF-021)

Compatible with our 2.5-3mm Brake Disc Plate

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes,Trolley's or Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $94.90

To suit Xtreme Hydraulic Brake Units (hand lever or foot units)

Code on brake pads can be:

TL-F305

RH-7067

WF-021 

Price $15.00

Use this to mount Xtreme  Hydraulic Brake Units to chassis.

PCD 65mm

Price $10.00

Compatible with Xtreme Hydraulic Foot Brake Unit.

190mm Length

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $24.90

WHEEL RIM DRIFT Go Kart 13*5-6

172mm Diameter x 98mm Width

Bolt hole diameter 10mm

To suit  tyres 13*5-6 

(Our Sportz, Trail Blazer, Caged, and Honda Drifta Go Karts )

Price $27.90

WHEEL RIM DRIFT Go Kart 145/70-6

172mm Diameter x 114mm Width

To suit tyres 145/70-6 

(Our Blazer, Ultimate and Xtreme Drifta Go Karts)                                                                                             

Price $29.90

WHEEL RIM DRIFT Go Kart 7" 

200mm Diameter x 132mm Width

To suit 15*5-7 and 16*8-7 tyres.

Price $32.90

Knobbly tyre Size 13*5-6.

Inflated 290mm Diameter x 120mm Wide.

Tubeless.

To suit WHEEL RIM DRIFT Go Kart 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, Junior, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Price $29.90

BUY 2 FOR DISCOUNT. 13*5-6.

Inflated 290mm Diameter x 120mm wide.

Tubeless.

To suit WHEEL RIM DRIFT  Go Kart 13*5-6 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, Junior, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Price $52.00

Slick tyre size 13*5-6.

Inflated 290mm Diameter x 120mm Wide.

Tubeless.

To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Awesome for extra sliding & drifting on grass.

Please note: Tread pattern may vary slightly to image shown.

Price $32.00

BUY 2 FOR DISCOUNT 13*5-6

Inflated 290mm Diameter x 120mm Wide.

Tubeless.

To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.

Awesome for etxra sliding & drifting on grass.

Please note: Tread pattern may vary slightly to image shown.

Price $60.00

Turf tyre size 13*5-6.

Tubeless.

To suit WHEEL RIM DRIFT Go Kart 13*5-6 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Awesome for extra sliding & drifting on grass.

Price $35.00

BUY 2 FOR DISCOUNT. 13*5-6.

Tubeless.

To suit WHEEL RIM DRIFT  Go Kart 13*5-6 172mm Diameter x 98mm Width.

These tyres will fit our Sportz, Caged, Honda, and Trail Blazer Drifta Go Karts.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Price $65.00

Tyre size 145/70-6

Inflated 355mm Diameter x 135mm Wide.

Tubeless

To suit WHEEL RIM DRIFT Go Kart 145/70-6

Please note: Tread pattern may vary slightly to image shown.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Price $44.90

BUY 2 FOR DISCOUNT

Tyre size 145/70-6

Inflated 355mm Diameter x 135mm Wide.

Tubeless

To suit WHEEL RIM DRIFT Go Kart 145/70-6

Please note: Tread pattern may vary slightly to image shown.

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Drift Trikes, Trolley's.

Ideal for any DIY project.

Price $85.00

Tyre & Rim complete with KNOBBLY tread 13*5-6.

These come standard with our Sportz Drifta 200cc Go Karts.

Price $47.00

Tyre & Rim complete with SLICK tread 13*5-6.

Price $47.00

Tyre & Rim complete with ROAD tread 13*5-6.

Our Trail Blazer 200cc Drifta Go Karts come standard with this tyre tread.

Price $47.00

Tyre & Rim complete with TURF tread size 13*5-6.

Ideal for Off Road.

Price $47.00

KNOBBLY TYRE TREAD 13*5-6

BUY 2 FOR DISCOUNT.

Price $88.00

SLICK TYRE TREAD 13*5-6

BUY 2 FOR DISCOUNT.

Price $88.00

ROAD TYRE TREAD size 13*5-6.

BUY 2 FOR DISCOUNT.

Price $88.00

BUY 2 FOR DISCOUNT.

Ideal for Off Road.

Price $88.00

KNOBBLY TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT. 

Price $169.00

SLICK TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

Price $169.00

ROAD TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

Price $169.00

TURF TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

Price $169.00

Tyre size 145/70-6.

Tubeless.

To suit our Blazer, Ultimate & Xtreme Drifta Go Karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Please note: Tread pattern may vary slightly to image shown.

Price $57.90

BUY 2 TO GET DISCOUNT.

Tyre size 145/70-6.

Tubeless.

To suit our Blazer, Ultimate & Xtreme Drifta Go Karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Please note: Tread pattern may vary slightly to image shown.

Price $100.00

Tyre size 15*6.00-6

Tubeless.

Turf Tread.

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.00

BUY 2 TO GET DISCOUNT.

Tyre size 15*6.00-6

Tubeless.

Turf Tread.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $135.00

TYRE ONLY TURF TREAD 15*6.00-6.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $49.00

BUY 2 TO GET DISCOUNT.

Tyre size 15*6.00-6

Turf Tread.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $95.00

Tyre size 16*8-7.

Inflated 410mm Diameter x 165mm wide. Tubeless.

Compatible with WHEEL RIM DRIFT Go Kart 7 inch.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's.

Please note: Tread pattern may vary slightly to image shown.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $52.00

Tyre size 16*8-7

Tubeless.

Please Note: Tread pattern may vary to image shown. 

Rim colour is silver. 

Price $75.00