Drifta Parts - Engine

Centrifugal clutch with inbuilt 5mm keyway.

To suit 5.5HP & 6.5HP engines.

Dry centrifugal clutch.

Bore 19.05mm (3/4 inch). 10 tooth, 420 pitch.

To suit engines for our Sportz, Honda & Caged Drifta Go Karts.

Price $68.90

Clutch Spring

To suit centrifugal clutch as pictured above.

Price $12.90

Throttle cable for Drifta Go Karts.

This is suitable for use as an accelerator cable or a manual disc brake cable.

Extra long cable.

2.35 Metre length

Replacement part for our single seater Drifta Go Karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $18.90

Chain 31 link 

420 pitch drive chain 80cm length

To suit Go Kart frames with a 6.5HP Engine with dry centrifugal clutch starting with serial # LAKS.... and YKHM....

(Sportz Drifta 200cc,  Honda Drifta 163cc)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $24.90

Chain 30 link

420 pitch drive chain.

To suit Go Kart frames starting with serial # ZJLH.

Price $24.90

Chain 36 link

420 pitch drive chain

Compatible with Trail Blazer, Caged Trail Blazer, Blazer & Ultimate Drifta Go Karts.

To suit Go Kart frames with a 6.5HP Engine with wet clutch, serial # LAKS.... amd YKHM....

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $26.90

Chain 40 link

420 pitch drive chain

To suit Go Kart frames with a 9.0HP Engine with wet clutch, serial # LAKS.... and YKHM....

Compatible with Xtreme Drifta 270cc Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $27.90

Chain drive joiner link

420 Pitch

To fit chains on our 6.5HP and 9.0HP Drifta Karts.

(Chains displayed above)

Price $1.90

Left Hub Chain for our Drifta single seater Go Karts.

(excluding Junior Drifta 80cc Go Karts).

Compatible with our Chain Drive Sprocket & Rear Axles. High quality stainless steel which is 6mm thick.

Outside Diameter is 95mm Height is 45mm. ID of centre bore is 25mm with spline.

4- hole stud pattern with distance between centre of holes 57mm. 10mm holes.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $35.90

48 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts, Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Price $36.90

54 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is  220mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Price $42.90

48 tooth 420 rear sprocket 

Chain Sprocket complete with left chain hub for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Rear Axles and chains. Chain drive sprocket is high quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Come complete with bolts, nuts and washers.

Price $67.90

To suit our Sportz, Caged, and Honda Drifta Go Karts with dry centrifugal clutch engine.

Easy to bolt on.

Price $34.90

To suit our Trail Blazer, Blazer, and Ultimate Drifta Go Karts with wet clutch engine.

Easy to bolt on.

Price $34.90

Replacement air filter for 5.5 & 6.5HP Honda or Honda design engines. 

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Drifta single seater 200cc Go Kart engines.

Price $18.90

Replacement air filter for 9.0HP Engine

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Xtreme Drifta 270cc single seater Go Kart engines.

Price $26.90

This is the complete air filter assembly.

Includes air filter and plastic casing.

This will fit most 5.5 & 6.5HP petrol engines. The bolt holes are approximately 44mm apart.

Price $39.90

This is the complete air filter assembly.

Includes air filter and plastic casing.

This will fit most 9.0HP petrol engines. 

Price $49.90

KILL SWITCH on/off

Compatible with KILL SWITCH WIRING (below).

Attaches to Steering Wheel (Butterfly style) on Drifta Go Karts.

A good safety feature with KILL SWITCH WIRING to add to any motorised product.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $12.90

KILL SWITCH WIRING to attach to KILL SWITCH on/off

Length of wiring is 170cm

Attaches to wiring on engine.

A good safety feature with KILL SWITCH on/off to add to any motorised product.

Compatible with Drifta Go Karts

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $15.90

This Accelerator Plate / Throttle control is suitable for 5.5HP & 6.5HP engines.

Replacement part for our Drifta single seater Go Karts.

The plate/lever is compatible for attaching Throttle cable to engine on Go Karts or Grass Karts.

Price $25.90

Ignition system / coil for 5.5HP & 6.5HP petrol engines (Transitorized magneto).

To suit 6.5HP engines on our Drifta 200cc Go Karts.

Price $49.90

Ignition system / coil for 9.0HP petrol engines (Transitorized magneto).

To suit 9.0HP engines on our Xtreme Drifta 270cc Go Karts.

Price $54.90

Spark plug cap for 5.5 , 6.5HP and 9.0HP petrol engines.

Price $9.90

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

• 6.5 HP(5Kw) Engine 200cc centrifugal dry clutch with 19mm shaft
• 4-stroke air cooled
• Recoil pull start
• Comes complete with centrifugal clutch which has 10 tooth sprocket
• Suitable for a 420 sprocket & 420 chain
• Engine manual & spark plug remover included
• GW: 14.5kg

Replacement engine for our Sportz, Caged, Honda Drifta Go Karts.

Price $399.00

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

• 6.5 HP(5Kw) Engine 200cc WET CLUTCH with 2:1 Reduction gear box.
• 4-stroke air cooled
• Recoil pull start
• Comes complete with clutch & 14 tooth drive sprocket as pictured below
• Engine manual & spark plug remover
• GW: 19kg

Replacement engine for our Trail Blazer, Blazer, Ultimate Drifta Go Karts.

Price $459.00

To attach 6.5HP & 9.0HP engines to the mounting plate on rear frames of our DRIFTA karts.

The price is for 2.

(Sold as a pair).

Price $8.90

4-STROKE OIL FOR ENGINES & WET CLUTCH UNITS ON OUR DRIFTA KARTS

Price $25.90

To suit 6.5HP engine with a Centrifugal dry clutch.

Price $4.90

To suit 6.5HP engine with a wet clutch.

Price $4.90

To suit 5.5 and 6.5HP engines.

Price $9.90

To suit 6.5HP Motor 200cc with wet clutch.

2:1 Reduction gear box.

Price $107.90

To suit 9.0HP Motor 270cc with wet clutch.

2:1 Reduction gear box.

Price $118.90

Complete 6.5HP clutch with housing. 

Includes wet clutch, chain, shaft & sprocket.

Price $220.00

Complete 9.0HP clutch with housing. 

Includes wet clutch, chain, shaft & sprocket.

Price $230.00

To suit 6.5HP Motor 200cc Wet Clutch.

14 tooth sprocket.

To suit 20mm shaft.

420 PITCH.

Price $15.90

To suit 6.5HP Motor 200cc Wet Clutch.

14 tooth sprocket.

To suit 20mm shaft.

With key, spacer, washer, and bolt for engine shaft.

420 PITCH.

Price $21.90

To suit 9.0HP engine with wet clutch.

14 tooth sprocket.

To suit 25mm shaft

420 PITCH

Price $19.90

To suit 9.0HP engine with wet clutch.

14 tooth sprocket with key, spacer, washer, and bolt for engine shaft.

To suit 25mm shaft

420 PITCH

Price $25.90

Exhaust muffler

To suit 5.5HP & 6.5HP engines.

Price $39.90

Recoil Pull Start assembly.

To suit 5.5HP & 6.5HP stationary engines.

Measures 175mm diameter. Mounting bolt holes at 160mm PCD.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

Price $36.90

Recoil Pull Start assembly.

To suit 9.0HP stationary engine

To suit engines on our Xtreme Drifta 270cc Go Karts.

Price $46.90

Carburetor for 6.5HP engine.

Throat size 19mm & 42mm centres for mounting bracket.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

Price $55.90

Carburetor for 9.0HP engines.

To suit our Xtreme Drifta 270cc go Kart engines.

Price $84.90

NGK Spark plug BKR6E

To suit all our single seater 200cc Drifta Karts, excluding Junior Drifta 80cc.

Price $12.90

80cc 4-STROKE ENGINE with recoil pull start.

To suit our Junior Drifta 80cc Go Karts.

1.2 litre fuel tank

2.5HP

Air cooled

Complete with Centrifugal Clutch

Price $399.00

9.0 HP stationary petrol engine.

To suit our Xtreme Drifta 270cc Go Karts.

Delivers strong power and torque

Measurements of engine: 

Length 420mm

Width 300mm

Height 420mm

Shaft diameter 25mm

Shaft length 64mm

Product features:

• Complete with wet clutch
• Air cooled, 4-stroke OHV
• Recoil pull start
• 6 litre tank
• Bore & Stroke 77 & 58mm
• Displacement 270cc
• Max power 6.6kw at 3600rpm
• 1.1 litre oil capacity

GW: 31kg NW: 29kg

Price $695.00

Genuine Honda Engine GX160.

Air cooled 4-stroke OHV.

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

Price $695.00

OUT OF STOCK

Genuine Honda Engine GX200

Air cooled 4-stroke OHV

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

Price $695.00