Go Karts Direct Website Header Image

Got a query? Get in touch with the Go Karts Direct team who will be happy to help you.


Caged Trail Blazer Drifta 200cc Go Kart Blue

Click images to enlarge

AVAILABLE IN BLUE, RED, OR BLACK

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with padded roll cage, leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

 

Price $1,550.00


Sportz Drifta 200cc Go Kart Red

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,295.00


CENTRIFUGAL CLUTCH

Click images to enlarge

 

Centrifugal clutch with inbuilt 5mm keyway.

To suit 5.5HP & 6.5HP engines.

Bore 19.05mm (3/4 inch). 10 tooth, 420 pitch.

To suit engines for our Sportz, Honda & Caged Drifta Go Karts.

 

Price $68.00


Scrambler ATV 125cc

Click images to enlarge

OUT OF STOCK

 

Brand New to NZ market.

Features:

New easy turning system.

Front Spot +LED Light.

LCD Data Display with digital speedometer, rpm counter, distance odometer, temperature gauge.

Steel rim with colourful rim cover.

Front & Rear Cargo Rack. Front Anti-Collision Frame.

 

Specifications:

Motor Type: 125cc, Single cylinder, Air-cooled, petrol

Start System: Electric Start

Ignition: CDI

Battery:   12V/4Ah

Fuel capacity: 2.2L

Max power: 5.3kw/7500r/min

Max torque: 8.0Nm/6500r/min

Gears: D-N-R

Transmission: Chain Drive

Front brake: Double Drum brakes

Rear brake: Single Disc brake

Front Suspension: Independent double shock absorber

Rear Suspension: Single shock absorber

Tyres:  Front 19x7-8 / Rear 18x9.5-8

Max. speed: 60km/h

Max. load: 100kg

Seat height: 67cm

Wheelbase: 970mm

Ground Clearance: 100mm

Overall Size (L*W*H): 1500 x 970 x 965mm

Packaging size: 1310 x 770 x 620mm

Unit Weight: NW:120kg

Recommended age: 10years +

This item comes in a steel framed carton and requires assembly.

We can fully assemble in our workshop for you for an additional fee. (Pick ups only)

 

Price $1,895.00


Trail Blazer Drifta 200cc Go Kart Black

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

 

Price $1,395.00


Tack Box

Click images to enlarge

Features and Specifications:
8 hooks inside
Two adjustable and detachable Saddle Holders
External Telescopic Saddle bar
Comfortable bar for easy pushing and pulling
Stamping panel for an easy push up start
Vents to allow moisture to escape
Heavy duty wheels
Convenient mirror
Multi-compartment grooming box at top
Lightweight for easy transport
Rigid frame of tubular steel
Exterior: Super strong high density polyethylene (HDPE)
Fully secure-lockable with 2 keys supplied
Width 582mm
Depth 781mm
Height 1170mm
Weight 26kg

Freight: Delivery Area Price
North Island main centre  $70.00
South Island main centre  $140.00
North Island RD address $95.00
South Island RD address $180.00

Please contact us if you have any questions.

Price $795.00


Junior Drifta 80cc Go Kart Red

Click images to enlarge

Features
Engine: Single cylinder, air cooled 4-stroke OHV
Displacement: 80cc
Power: 3.5hp
Drive System: Direct drive axle
Starting system: Recoil pull start
Clutch type: Centrifugal dry
Tyres: 6' off road knobbly tyres
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 1.5 litre
Max speed: 25km/h
Fuel type: Unleaded petrol
Pay load: Recommended maximum weight- 70kg
Packaging: NW: 60kg, GW: 80kg
Packaging dimensions: 140cm Length x 85cm Width x 65cm Height
Assembled dimensions: 140cm Length x 85cm Width x 65cm Height
The seat is adjustable from front to back

Distance from pedals to back of seat when seat is fully forward: 650mm

Distance from pedals to back of seat when seat is fully back: 750mm

Price $1,150.00


Junior Drifta 80cc Go Kart Black

Click images to enlarge

Features
Engine: Single cylinder, air cooled 4-stroke OHV
Displacement: 80cc
Power: 3.5hp
Drive System: Direct drive axle
Starting system: Recoil pull start
Clutch type: Centrifugal dry
Tyres: 6' off road knobbly tyres
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 1.5 litre
Max speed: 25km/h
Fuel type: Unleaded petrol
Pay load: Recommended maximum weight- 70kg
Packaging: NW: 60kg, GW: 80kg
Packaging dimensions: 140cm Length x 85cm Width x 65cm Height
Assembled dimensions: 140cm Length x 85cm Width x 65cm Height

The seat is adjustable from front to back

Distance from pedals to back of seat when seat is fully forward: 650mm

Distance from pedals to back of seat when seat is fully back: 750mm

Price $1,150.00


Drifta Electric ATV 500W

Click images to enlarge

Brand new to NZ market. 

INTRODUCTORY OFFER NOW, DISCOUNTED PRICE

Features:

Simple frame design

500W High Torque Chain Driven Motor

Twist-grip Acceleration Control

Rechargeable Lead Acid Battery System with Quick Change Compartment

Latest electrics technology. Long Running Distance. Power Brush Motor.

Light weight & very easy for children to operate, comes with added feature of LED night lights.

 

Specifications:

Motor Type: 36V/500W Brush Motor

Transmission: Chain Drive

Rated voltage: 36V

Charger: AC100-240V 50/60Hz 1.2A

Charge Time: 6H

Run Distance per charge: 18km

Max. Speed: 20km/h

Max. Load: 60kg

Seat Height: 600mm

Wheelbase: 590mm

Ground clearance: 85mm

Brakes Rear: Hand Disc Brake

Front & Rear Tyre: 16x4.5-7 / 14x5.5-6

Overall Size (L*W*H): 1235 x 730 x 910mm

Packaging size: 1150 x 685 x 590mm

Unit Weight: GW: 66kgs NW: 59kgs

Recommended age: 5-11years

Please enquire for freight prices to your delivery area. we welcome pick ups.

Final assembly required

 

Price $895.00


CLUTCH SPRING

Click images to enlarge

Clutch Spring

To suit centrifugal clutch as pictured above.

 

Price $9.00


Trail Blazer Drifta 200cc Go Kart Blue

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

 

Price $1,395.00


THROTTLE CABLE

Click images to enlarge

 

Throttle cable for Drifta Go Karts.

This is suitable for use as an accelerator cable or a manual disc brake cable.

Extra long cable.

2.35 Metre length

Replacement part for our single seater Drifta Go Karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $16.00


Trail Blazer Drifta 200cc Go Kart Red

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

 

Price $1,395.00


Sportz Drifta 200cc Go Kart Blue

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,295.00


Sportz Drifta 200cc Go Kart Yellow

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,295.00


Sportz Drifta 200cc Go Kart Black

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,295.00


Ultimate Drifta 200cc Go Kart Red

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,550.00


Ultimate Drifta 200cc Go Kart Blue

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,550.00


REAR WHEEL HUB

Click images to enlarge

8cm distance between 3 stud holes which are 10mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines. OD of flange is 104mm. Height of Rear Wheel hub is 45mm 

Rear wheel hubs for Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's or ideal for any DIY project. 

 

Price $32.90


FRONT WHEEL HUB

Click images to enlarge

Front wheel hubs complete with bearing.

ID of bearing is 17mm.

80mm distance between 3 stud holes which are 10mm. These are compatible with our Front connecting arms with a 17mm shaft. OD of flange is 104mm. Height of Front Wheel Hub is 45mm 

Ideal for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

These are good quality one piece fittings.

 

Price $35.90


FRONT WHEEL HUB BEARING (pair)

Click images to enlarge

Bearing to suit Front wheel hub (as shown above).

These are sold as a set of 2

Code: 6003

ID of bearing is 17mm

OD of bearing is 34mm

 

Price $18.90


10mm BOLT PACK - set of 12

Click images to enlarge

To suit our Drifta single seater Go Kart Wheel Hubs

12 x 10mm bolts 25mm long

12 x flat washers

12 x spring washers

12 x locking nuts

 

Price $19.90


10mm BOLT PACK - set of 3

Click images to enlarge

To suit our Drifta single seater Go Kart Wheel Hubs

3 x 10mm bolts 25mm long

3 x flat washers

3 x spring washers

3 x locking nuts

 

Price $6.90


FRONT CONNECTING ARM - LEFT

Click images to enlarge

Front Connecting Arm/ Front Stub Axle/ Front Spindle for our single seater Drifta Go Karts (excluding Junior Drifta 80cc Go Kart).

Ideal for any DIY building project.

Compatible with our Front wheel hubs & tie rods. Shaft length 72mm Shaft diameter 17mm

Please note: The left side is the Left hand side when sitting in the drivers seat.

 

Price $34.90


FRONT CONNECTING ARM - RIGHT

Click images to enlarge

Front Connecting Arm/ Front Stub Axle/ Front Spindle for our single seater Drifta Go Karts (excluding Junior Drifta 80cc Go Kart).

Ideal for any DIY building project.

Compatible with our Front wheel hubs & tie rods. Shaft length 72mm Shaft diameter 17mm

Please note: The right side is the Right hand side when sitting in the drivers seat.

Please note Castle/Axle nuts are sold separately as a pair.

 

Price $34.90


BRAKE DISC PLATE

Click images to enlarge

High quality stainless steel plate which is 2.5mm thick.

OD is 180mm. ID of centre hole is 38mm.

Brake Plate for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our Right Hub Brake & Rear Axles.

 

Price $36.90


BRAKE DISC PLATE COMPLETE WITH RIGHT HUB BRAKE

Click images to enlarge

Brake Disc Plate complete with right brake hub.

High quality stainless steel plate which is 2.5mm thick.

OD is 180mm.

ID of centre hole of Brake Plate is 38mm.

Comes complete with bolts.

To suit our Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's.

Ideal for any DIY project. Compatible with our Rear Axles.

 

Price $65.90


RIGHT HUB BRAKE

Click images to enlarge

25mm distance between 6 bolt holes which are 5mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines.

OD of flange is 60mm. Height of Right Hub Brake is 45mm.

Right Hub Brake for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our brake plate.  

 

Price $32.90


REAR DISC BRAKE ASSEMBLY

Click images to enlarge

Cable operated caliper comes complete with brake pads.

Mechanical cable brake.
Suitable for 2.5-3mm brake disc plate.

Distance between mounting bracket holes centre to centre is 52mm.

Suitable for Grass Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.

 

Price $32.90


DISC BRAKE PADS (SET OF 2)

Click images to enlarge

To suit REAR DISC BRAKE ASSEMBLY.

(Mechanical cable brake system).

Rear Disc Brake Assembly pictured above.

Please note: Some brake pads for this brake assembly are rectangular shape.

Please specify when ordering if you need the rectangular pads.

 

Price $10.00


BRAKE PADS LWK (SET OF 2)

Click images to enlarge

To suit smaller Go Kart Hydraulic brake units. (Not Xtreme Hydraulic brake units).

(Please note: this smaller brake unit is now obsolete)

Please note: Go Kart frames starting with serial # ZJLH had this smaller brake unit.

 

Price $12.00


STANDARD HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER

Click images to enlarge

Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.

To suit butterfly steering wheels on Drifta Go Karts.

Brake hose length 140cm from caliper to handle. Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)

Easy to install, Just bolt on.

Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS... or YKHM2019...

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

 

Price $69.90


STANDARD HYDRAULIC BRAKE PADS (SET OF 2)

Click images to enlarge

To suit Standard Hydraulic Brake Unit Complete With Hand Lever (pictured above) and Go Kart frames starting with serial # LAKS... and YKHM2019...

(Code on brake pads YL-F328 or HMZ-7006)

 

Price $15.00


STANDARD HYDRAULIC BRAKE BRACKET

Click images to enlarge

To suit Standard Hydraulic Brake Unit Complete with Hand Lever - LAKS serial.

Available in different colours of go karts.

Mounting holes are 40mm apart, holes drilled to suit brake caliper above.

 

Price $21.90


XTREME HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER

Click images to enlarge

OUT OF STOCK

YOU CAN PLACE ON BACK ORDER AND WE WILL SEND AS SOON AS RECEIVED APPROXIMATELY 10.08.2020

XTREME HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER
Suitable for 2.5-3mm brake disc plate.
Brake hose length 160cm from caliper to handle.
To suit brake units for Go Kart frames starting with serial # ZJLH. (These are not the standard unit for our own Drifta Go Karts with serial # LAKS... or YKHM2019... They can be used if adapted with a replacement brake bracket.)

For ZJLH... or LW-GK Drift Go Karts 2013 or older you will need a brake bracket to attach these brake units.( The original brake units on these karts are now obsolete)

These Xtreme Brake Units are ideal if you are building your own kart.

Suitable for Drift Go Karts, Grass Karts, Off Road Karts, Sliders, Carts, Drift Trikes & Trolley's. Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Comes complete with Xtreme Hydraulic Brake Pads

These brake pad codes below will fit this brake unit:

Code TL-F305

Code RH-7067

Code WF-021

 

Price $75.00


XTREME HYDRAULIC BRAKE UNIT COMPLETE SUITABLE FOR FOOT PEDAL

Click images to enlarge

XTREME HYDRAULIC BRAKE UNIT COMPLETE SUITABLE FOR FOOT PEDAL

These are designed for use with Foot pedals.

Brake hose length 125cm from caliper to handle.

Comes complete with Xtreme Hydraulic Brake Pads

(Code TL-F305) or (RH-7067) or (WF-021)

Compatible with our 2.5-3mm Brake Disc Plate

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes,Trolley's or Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $95.00


XTREME HYDRAULIC BRAKE PADS (2 PCS) 1 x SET

Click images to enlarge

XTREME HYDRAULIC BRAKE PADS (2PCS)  1 x SET
To suit Xtreme Hydraulic Brake Units (hand lever or foot units)

Code on brake pads can be:

TL-F305

RH-7067

WF-021 

 

Price $15.00


XTREME BRAKE BRACKET

Click images to enlarge

Use this to mount Xtreme  Hydraulic Brake Units to chassis.

PCD 65mm

 

Price $10.00


FOOT PEDAL TO SUIT XTREME FOOT BRAKE

Click images to enlarge

Compatible with Xtreme Hydraulic Foot Brake Unit.

190mm Length

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $24.90


AXLE BEARING

Click images to enlarge

AXLE BEARING (each)

UC 205

Inside diameter(ID) 25mm

Outside diameter (OD) 50mm

Comes with grub screws.

Compatible for use with our Rear Axle Shaft 880mm & 980mm

Ideal for any DIY project and suitable for 25mm axle.

 

Price $18.90


REAR AXLE SHAFT 880mm - Drifta Go Kart

Click images to enlarge

30mm thick in centre tapering to 25mm at end with spline.

Length: 880mm

Compatible with our own Drifta brand Go Karts (serial # LAKS... or YKHM2019...)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $85.00


REAR AXLE SHAFT 980mm - XL Length

Click images to enlarge

30mm thick in centre tapering to 25mm at end with spline.

Length: 980mm 

Extra Long Rear Axle

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $90.00


REAR AXLE 880mm COMPLETE WITH FITTINGS

Click images to enlarge

This Rear Axle Kit includes 1 x 880mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Axle Spacer-Short, 2 x Castle Nuts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's  

Ideal for building/modifying your own Go Kart or any DIY project.

 

Price $290.00


REAR AXLE 980mm COMPLETE WITH FITTINGS

Click images to enlarge

This Rear Axle Kit includes 1 x 980mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Castle Nuts, 2 x Spacers

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's. 

Ideal for building/modifying your own Go Kart or any other DIY project.

 

Price $295.00


AXLE SPACER - SHORT (pair)

Click images to enlarge

To suit 25mm Axle, these are sold as a pair.

ID: 25mm

OD: 32mm

Width is 20mm.

 

Price $8.90


AXLE SPACER - LONG (pair)

Click images to enlarge

To suit 25mm Axle, these are sold as a pair.

ID: 25mm

OD: 37mm

Width is 50mm.

 

Price $15.90


CASTLE / AXLE NUTS (pair)

Click images to enlarge

Axle Nuts suitable for Rear Axle and Front Connecting arms ( ID:15mm).

Sold as a pair.

To suit our Drifta Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $2.90


BEARING BRACKET/HOLDER (set of 2)

Click images to enlarge

Bearing bracket/holder available in different colours of go karts.

These are sold as a pair

Inside diameter: 50mm

Distance between 3 bolt holes is 65mm.

Compatible with our Drifta brand Go Karts (serial # LAK) and components.

Ideal for DIY Drift Go Karts, Buggies, Trolleys.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $18.00


CHAIN 31 Links

Click images to enlarge

Chain 31 link 

420 drive chain 80cm length

To suit Go Kart frames with a 6.5HP Engine with centrifugal clutch starting with serial # LAKS.. and YKHM2019..

(Sportz Drifta 200cc, Caged Drifta 200cc, Honda Drifta 163cc)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $24.00


CHAIN 30 Links

Click images to enlarge

Chain 30 link

To suit Go Kart frames starting with serial # ZJLH.

 

Price $24.00


CHAIN 36 Links

Click images to enlarge

 

Chain 36 link

420 drive chain

Compatible with Trail Blazer, Blazer & Ultimate Drifta Go Karts.

To suit Go Kart frames with a 6.5HP Engine with wet clutch, serial # LAKS.. amd YKHM2019..

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $26.00


CHAIN 35 links

Click images to enlarge

Chain 35 link

420 drive chain

Ideal for any DIY building project.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift Go Karts, Drift Trikes, Trolley's.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $26.00


CHAIN 40 links

Click images to enlarge

Chain 40 link

420 drive chain

To suit Go Kart frames with a 9.0HP Engine with wet clutch, serial # LAKS.. and YKHM2019..

Compatible with Xtreme Drifta 270cc Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $28.00


LEFT HUB CHAIN

Click images to enlarge

Left Hub Chain for our Drifta single seater Go Karts.

(excluding Junior Drifta 80cc Go Karts).

Compatible with our Chain Drive Sprocket & Rear Axles. High quality stainless steel which is 6mm thick.

Outside Diameter is 95mm Height is 45mm. ID of centre bore is 25mm with spline.

4- hole stud pattern with distance between centre of holes 57mm. 10mm holes.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $32.90


CHAIN DRIVE SPROCKET - 48 TOOTH

Click images to enlarge

48 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts, Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

 

Price $36.90


CHAIN DRIVE SPROCKET - 54 TOOTH

Click images to enlarge

54 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is  220mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

 

Price $42.90


CHAIN DRIVE SPROCKET COMPLETE WITH LEFT CHAIN HUB

Click images to enlarge

48 tooth 420 rear sprocket 

Chain Sprocket complete with left chain hub for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Rear Axles and chains. Chain drive sprocket is high quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Come complete with bolts, nuts and washers.

 

Price $65.90


CHAIN GUARD STANDARD

Click images to enlarge

To suit our Sportz, Caged, and Honda Drifta Go Karts with dry centrifugal clutch engine.

Easy to bolt on.

 

Price $34.90


CHAIN GUARD XL

Click images to enlarge

To suit our Trail Blazer, Blazer, and Ultimate Drifta Go Karts with wet clutch engine.

Easy to bolt on.

 

Price $34.90


SHOCK ABSORBER

Click images to enlarge

Total length: 210mm

Eye to eye: 180mm 

To suit our own Drifta Go Kart frames starting with serial # LAKS... or YKHM2019...

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts, trolley's or other DIY projects.

 

Price $29.90


SHOCK ABSORBER ADJUSTABLE

Click images to enlarge

Total length: 210mm.

Eye to eye: 180mm
To suit Go Kart frames starting with serial # ZJLH.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts, trolley's or other DIY projects.

 

Price $29.90


AIR FILTER

Click images to enlarge

Replacement air filter for 5.5 & 6.5HP Honda or Honda design engines. 

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Drifta single seater 200cc Go Kart engines.

 

Price $18.90


AIR FILTER 9.0HP ENGINE

Click images to enlarge

Replacement air filter for 9.0HP Engine

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Xtreme Drifta 270cc single seater Go Kart engines.

 

Price $26.90


AIR FILTER COMPLETE

Click images to enlarge

This is the complete air filter assembly.

Includes air filter and plastic casing.

This will fit most 5.5 & 6.5HP petrol engines. The bolt holes are approximately 44mm apart.

 

Price $39.90


KILL SWITCH on/off

Click images to enlarge

KILL SWITCH on/off

Compatible with KILL SWITCH WIRING (below).

Attaches to Steering Wheel (Butterfly style) on Drifta Go Karts.

A good safety feature with KILL SWITCH WIRING to add to any motorised product.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $10.00


KILL SWITCH WIRING

Click images to enlarge

KILL SWITCH WIRING to attach to KILL SWITCH on/off

Length of wiring is 170cm

Attaches to wiring on engine.

A good safety feature with KILL SWITCH on/off to add to any motorised product.

Compatible with Drifta Go Karts

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $15.00


THROTTLE HANDLE

Click images to enlarge

Throttle/ Accelerator handle.

Attaches to our Steering wheel - Drifta (Butterfly style)

Used as a throttle lever for our Drifta brand karts with hand controls.

Can be used with a cable for mechanical brake system (Rear Disc Brake Assembly).

Please note: This is not a handle for  our Hydraulic brake units.

 

Price $18.90


STEERING WHEEL - DRIFTA

Click images to enlarge

Butterfly Style or Formula One Steering Wheel.

Please note colour of steering wheel is now BLACK

340mm Across x 170mm Height

Distance between 3 mounting holes to attach to steering shaft is 33mm.

Compatible with our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Attaches to Steering Column.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $39.90


XTREME STEERING WHEEL

Click images to enlarge

Dimensions: 310mm Width x 260mm Height.

Distance between 6 bolt holes to attach to steering shaft/column is 35mm

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $49.00


STEERING HANDLE ASSEMBLY COMPLETE

Click images to enlarge

Includes steering wheel, steering column with fittings and kill switch.

Please note colour of steering wheel is now BLACK

Compatible with all our Drifta single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $95.00


STEERING COLUMN

Click images to enlarge

Steering column 540mm long.

Distance between 3 mounting holes to attach to steering wheel is 33mm.

Compatible with our Steering Wheel (Butterfly style) for our own Drifta brand karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $39.90


STEERING COLUMN WITH FITTINGS

Click images to enlarge

Steering column with fittings 540mm long.

Includes bottom plate.

Distance between 3 mounting holes to attach to steering wheel is 33mm.

Compatible with our Steering Wheel (Butterfly style) for our own Drifta brand karts

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

 

 

Price $59.90


STEERING BOTTOM PLATE

Click images to enlarge

Replacement bottom plate for steering column with fittings, and steering handle assy complete.

Attach to steering tie rod from steering column.

92mm length.

 

Price $9.00


ACCELERATOR PLATE

Click images to enlarge

This Accelerator Plate / Throttle Lever is suitable for 5.5HP & 6.5HP engines.

Replacement part for our Drifta single seater Go Karts.

The plate/lever is compatible for attaching Throttle cable to engine on Go Karts or Grass Karts.

 

Price $22.90


IGNITION SYSTEM - COIL

Click images to enlarge

Ignition system/Coil for 5.5HP & 6.5HP petrol engines (Transitorized magneto).

 

Price $49.00


SPARK PLUG CAP

Click images to enlarge

Spark plug cap for 5.5 & 6.5HP petrol engines.

 

Price $9.90


DUST CAP

Click images to enlarge

DUST CAP for Drifta Go Kart wheels hubs.

 

Price $5.00


DUST CAP WASHER (pair)

Click images to enlarge

Dust cap washer to suit Drifta Go Karts

Sold as a pair

 

Price $2.90


SEAT

Click images to enlarge

Go Kart Seat

440mm Across x 430mm Height

Compatible with all our Drifta single seater Go Karts excluding Junior Drifta 80cc.

Heavy Duty Strong Flexible Plastic.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $50.00


SEAT COVER VINYL

Click images to enlarge

Seat Cover Vinyl.

To suit our Drifta single seater go kart seats (excluding Junior Drifta 80cc).

630mm across (line of fabric) Maximum width.

 

Price $20.00


SEAT COVER PADDED - BLUE

Click images to enlarge

Seat cover padded with blue stripes.

To suit Go Kart Seat pictured above.

 

Price $48.00


SEAT COVER PADDED - RED

Click images to enlarge

Seat cover padded with red stripes.

To suit Go Kart Seat pictured above.

 

Price $48.00


LAP SEAT BELT

Click images to enlarge

OUT OF STOCK

NEW STOCK AVAILABLE 02.08.2020

YOU CAN BACK ORDER AND WE WILL SEND OUT AS SOON AS RECEIVED

Lap belt.

2 bolting points

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $24.90


HARNESS 3 POINT SEAT BELT

Click images to enlarge

Harness 3 point seat belt.

These suit our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc).

Easy adjustable straps to suit all sizes. 3 bolting points.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Please note: yellow strapping in photo may be black

 

Price $48.90


LONG TIE ROD / STEERING RACK

Click images to enlarge

Long tie rod/Steering rack with ball/rose end joints.

These suit our Drifta single seater Go Karts (excluding Junior Drifta 80cc).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes,Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

These measure 615mm eye to eye.

 

Price $32.90


SHORT TIE ROD

Click images to enlarge

Short tie rod/Steering rack with ball/rose end joints.

These suit our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

These measure 310 mm eye to eye.

 

Price $27.90


FRONT FRAME

Click images to enlarge

FRONT FRAME FOR DRIFTA GO KARTS 
Suitable for Sportz Drifta, Honda Drifta, Trail Blazer and Blazer Drifta Go Karts (non-caged karts).

Please note: These frames suit our own brand Drifta Go Karts.
Please specify the serial # on your Go Kart when ordering this part. ( our own Drifta Karts are LAKS.. or YKHM2019.. ) 
Available in most kart colours, please specify your colour preference when ordering or Enquire if we have in stock.

 

Price $90.00


FRONT FRAME CAGED

Click images to enlarge

FRONT FRAME FOR CAGED DRIFTA GO KARTS

Suitable for Caged Drifta and Ultimate Drifta Go Karts.

Please note: These frames suit our own brand Drifta Go Karts.
Please specify the serial # on your Go Kart when ordering this part. ( our own Drifta Karts are LAKS.. or YKHM2019.. ) 
Available in most kart colours, please specify your colour preference when ordering or Enquire if we have in stock.

Our roll cages attach to this front frame.

 

Price $95.00


DOME / CAP NUTS (pair)

Click images to enlarge

These are suitable for bolting front frame to mid frame.

Sold as a pair.

ID: 15mm 

 

Price $2.90


HEAD PROTECTOR-ROLL OVER HOOP

Click images to enlarge

Attaches behind seat to main frame of our single seater Drifta karts (non caged karts).

 

Price $39.90


ROLL CAGE - COMPLETE

Click images to enlarge

Complete Roll Cage.

Includes padding for bars ,and black fabric sun cover (not shown in photo).

Includes built-in comfortable padded head rest.

Comes as a kitset, just need to be bolted together.

These suit our own Drifta brand single seater Go Karts (excluding Junior Drifta 80cc) Serial # LAKS... or YKHM2019...

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $229.00


REAR FRAME

Click images to enlarge

Rear frame for our Drifta single seater Go Karts.

Also suitable for other DIY projects including Drift Trikes.

If this is for one of our Drifta Go Karts please advise which model as the engine mounting differs.

Centrifugal Dry Clutch 6.5HP Engine 

Wet Clutch 6.5HP Engine 

Wet Clutch 9.0 HP Engine

Please specify colour preference when ordering.

We cannot guarantee colour choice.

 

Price $139.00


REAR FRAME BUSH

Click images to enlarge

To suit swing arm on Rear Frame. (pictured above).

We have 2 sizes available. Please check the size before ordering and specify which size you require.

Size 1: Length 42mm, Outside diameter 30mm, Centre hole 10mm (HR)

Size 2: Length 45mm, Outside diameter 25mm, Centre hole 12mm (HM)

 

Price $9.90


6.5 HP ENGINE 200cc with Clutch

Click images to enlarge

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

  • 6.5 HP(5Kw) Engine 200cc centrifugal dry clutch with 19mm shaft
  • 4-stroke air cooled
  • Recoil pull start
  • Comes complete with centrifugal clutch which has 10 tooth sprocket
  • Suitable for a 420 sprocket & 420 chain
  • Engine manual & spark plug remover included
  • GW: 14.5kg

Replacement engine for our Sportz, Caged, Honda Drifta Go Karts.

 

Price $369.00


6.5 HP ENGINE 200cc WET CLUTCH

Click images to enlarge

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

  • 6.5 HP(5Kw) Engine 200cc WET CLUTCH with 2:1 Reduction gear box.
  • 4-stroke air cooled
  • Recoil pull start
  • Comes complete with clutch & 14 tooth drive sprocket as pictured below
  • Engine manual & spark plug remover
  • GW: 19kg

Replacement engine for our Trail Blazer, Blazer, Ultimate Drifta Go Karts.

 

Price $425.00


REAR AXLE 880mm COMPLETE WITH FITTINGS

Click images to enlarge

This Rear Axle Kit includes 1 x 880mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Axle Spacer-Short, 2 x Castle Nuts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's  

Ideal for building/modifying your own Go Kart or any DIY project.

 

Price $290.00


REAR AXLE 980mm COMPLETE WITH FITTINGS

Click images to enlarge

This Rear Axle Kit includes 1 x 980mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Castle Nuts, 2 x Spacers

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's. 

Ideal for building/modifying your own Go Kart or any other DIY project.

 

Price $295.00


BRAKE DISC PLATE WITH RIGHT BRAKE HUB

Click images to enlarge

Brake Disc Plate complete with right brake hub.

High quality stainless steel plate which is 2.5mm thick.

OD is 180mm.

ID of centre hole of Brake Plate is 38mm.

Comes complete with bolts.

To suit our Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's.

Ideal for any DIY project. Compatible with our Rear Axles.

 

Price $65.90


6.5HP SHAFT BOLT AND WASHER - CENTRIFUGAL CLUTCH

Click images to enlarge

To suit 6.5HP engine with a Centrifugal dry clutch.

 

Price $4.90


6.5HP BOLT AND WASHER - WET CLUTCH

Click images to enlarge

To suit 6.5HP engine with a wet clutch.

 

Price $4.90


CHAIN DRIVE SPROCKET WITH LEFT CHAIN HUB

Click images to enlarge

48 tooth 420 rear sprocket 

Chain Sprocket complete with left chain hub for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Rear Axles and chains. Chain drive sprocket is high quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Come complete with bolts, nuts and washers.

 

Price $65.90


STANDARD HYDRAULIC BRAKE UNIT COMPLETE

Click images to enlarge

Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.

To suit butterfly steering wheels on Drifta Go Karts.

Brake hose length 140cm from caliper to handle.

Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)

Easy to install, Just bolt on.

Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS.. and YKHM2019..

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

 

Price $69.00


GOVERNOR ROD AND SPRING

Click images to enlarge

To suit 5.5 and 6.5HP engines.

 

Price $9.90


WET CLUTCH 6.5HP

Click images to enlarge

To suit 6.5HP Motor 200cc with wet clutch.

2:1 Reduction gear box.

 

Price $107.90


TYRE & RIM COMPLETE 13*5-6 KNOBBLY TREAD SET OF 4

Click images to enlarge

KNOBBLY TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

 

Price $165.00


TYRE & RIM COMPLETE 13*5-6 SLICK TREAD SET OF 4

Click images to enlarge

SLICK TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

 

Price $165.00


WET CLUTCH 9.0HP

Click images to enlarge

To suit 9.0HP Motor 270cc with wet clutch.

2:1 Reduction gear box.

 

Price $118.00


TYRE & RIM COMPLETE 13*5-6 ROAD TREAD SET OF 4

Click images to enlarge

ROAD TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

 

Price $165.00


14 TOOTH SPROCKET WITH KEY

Click images to enlarge

To suit 6.5HP Motor 200cc Wet Clutch.

420 PITCH.

 

Price $15.90


STEERING HANDLE ASSEMBLY COMPLETE

Click images to enlarge

Includes steering wheel, steering column with fittings and kill switch.

Please note colour of steering wheel is now BLACK

Compatible with all our Drifta single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $95.00


14 TOOTH SPROCKET KIT

Click images to enlarge

To suit 6.5HP Motor 200cc Wet Clutch.

14 Tooth sprocket

With key, spacer, washer, and bolt for engine shaft

420 PITCH

 

Price $21.90


Go-Karting Helmets

Click images to enlarge

Off Road Helmets. Ideal for Go-karting.

Strong thermoplastic resin shell, fully padded lining,  adjustable chin strap, gloss finish.

Selection of sizes available for children and adults.

Please Note: colour and patterns  may vary slightly to that in photo.

Adult size helmets are blue and black colour patterns.

 

Price $110.00




EXPLORER - FRONT CONNECTING ARM - LEFT

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

 (Steering Knuckle Pin Left) 

Note: This is the Connecting Arm on the Left side when sitting in the kart.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $65.00


EXPLORER - FRONT CONNECTING ARM - RIGHT

Click images to enlarge

 TO SUIT MODEL KD-49FM5-E

 (Steering Knuckle Pin Right) 

Note: This is the Connecting Arm on the Right side when sitting in the kart.

To suit Explorer DriftaTwo Seater 110cc Go Kart 2015 model

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $65.00


EXPLORER - FRONT SHOCK ASORBER

Click images to enlarge

TO SUIT MODEL KD-49FM5-E 

(FRONT SHOCKS)

Total length 28cm. 25cm eye to eye


Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $40.00


EXPLORER - FRONT UPPER ARM

Click images to enlarge

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the front upper arm attachment

Suits left & right side.

 

Price $37.90


EXPLORER - FRONT LOWER ARM - RIGHT

Click images to enlarge

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the right hand side when you are sitting in the go kart.

 

Price $49.90


EXPLORER - FRONT LOWER ARM - LEFT

Click images to enlarge

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the left side when you are sitting in the go kart.

 

Price $49.90


EXPLORER - SWING ARM ASSEMBLY - LEFT - LOWER

Click images to enlarge

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the lower swing arm assembly on the left when sitting in the kart.

 

Price $45.00


EXPLORER - SWING ARM ASSEMBLY - LEFT - UPPER

Click images to enlarge

 TO SUIT EXPLORER MODEL KD-49FM5-E

This is the upper swing arm assembly on the left when sitting in the kart.

 

Price $45.00


EXPLORER - SWING ARM ASSEMBLY - RIGHT - LOWER

Click images to enlarge

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the lower swing arm assembly on the right when sitting in the kart.

 

Price $45.00


EXPLORER - SWING ARM ASSEMBLY - RIGHT - UPPER

Click images to enlarge

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the upper swing arm assembly on the right when sitting in the kart.

 

Price $45.00


EXPLORER - FRONT CLAW LEFT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2

Left Spindle 80mm length

This is for the left hand side when sitting in the kart.

 

Price $54.90


EXPLORER - FRONT CLAW RIGHT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2

Right spindle 80mm length

This is the right hand side when sitting in the kart.

 

Price $54.90


EXPLORER - FRONT HUB FLANGE

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

MODEL KD110GKT-2

Front hub 17mm x 75mm.

80mm distance between 3 x bolt holes.

 

Price $44.90


EXPLORER - STEERING BOX - KD-49FM5-E

Click images to enlarge

TO SUIT EXLPLORER GO KART MODEL KD-49FM5-E

Complete with tie rods

Total length 800mm

Please note: Steering Box for our later model Explorer Drifta is different

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $95.00


EXPLORER - STEERING BOX - KD-110GKT-2

Click images to enlarge

TO SUIT EXPLORER GO KART MODEL KD-110GKT-2

Complete with tie rods

Total length 940mm length

Please note: Steering Box for our earlier model Explorer Drifta is different

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $134.90


EXPLORER - TIE ROD WITH BALL JOINT

Click images to enlarge

TO SUIT Steering box Model KD-110GKT-2

Steering ball head and tie rod.

 

Price $34.90


EXPLORER - FRONT TIE ROD SHIELD LEFT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2

This is the left hand side when sitting in the kart.

 

Price $24.90


EXPLORER - FRONT TIE ROD SHIELD RIGHT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2

This is the right hand side when sitting in the kart.

 

Price $24.90


EXPLORER - STEERING SHAFT

Click images to enlarge

TO SUIT EXPLORER GO KART MODEL KD-49FM5-E

Please note Steering column for our later model Explorer Drifta is different.

(Steering Column)

Length is 580mm

Flange diameter is 55mm.

 

Price $40.00


EXPLORER - STEERING SHAFT STEM ASSY (2pcs)

Click images to enlarge

OUT OF STOCK

TO SUIT MODEL KD-110GKT-2  Explorer 110cc Go Kart

This is the complete assembly

Steering Shaft 470mm length 

Steering Stem 200mm length

The Steering wheel attaches to Steering stem.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts. Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $98.00


EXPLORER - STEERING WHEEL

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts

Outside diameter of Explorer Steering Wheel is 270mm

Distance between 3 centre holes is 35mm

Please note: metal centre piece is silver

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $79.00


EXPLORER - THROTTLE CABLE

Click images to enlarge

Two cable lengths available

2300mm for Explorer Drifta KD49FM5-E

1600mm for Explorer Drifta KD110GKT-2

Please specify which length you require when ordering

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $24.90


EXPLORER - GEAR SHIFT CABLE

Click images to enlarge

Gear Shift - Reverse cable.

To suit Explorer Drifta Two Seater 110cc Go Karts.

Measures 1030mm end to end.

U-brackets on both ends.

 

Price $34.90


EXPLORER - HAND BRAKE CABLE

Click images to enlarge

Handbrake cable for parking.

To suit Explorer Drifta Two Seater 110cc Go Karts

Total length 800mm.

 

Price $34.90


EXPLORER - PETROL TANK

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

                            KD-110GKT-2

350mm overall length x 160mm maximum width Height 65mm

Secures with 2 x bolt holes at either end.

Distance between bolt holes is 52mm

Includes petrol tank cap 

(Please NOTE: Petrol tank tap is sold separately, listed below)

To suit Explorer Drifta Two Seater 110cc Go Karts
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $49.90


EXPLORER - PETROL TANK TAP

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

                            KD-110GKT-2

Fuel switch/valve to control fuel flow

Use with 6mm ID fuel hose

To suit Explorer Drifta Two Seater 110cc Go Karts
Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $12.90


EXPLORER ENGINE - 110CC - COMPLETE

Click images to enlarge

Engine Type: 110cc, single cylinder, 4 stroke air cooled petrol
Power: 4.6kw/7500rpm
Max torque:6.5N.m/5500-6500rpm
Transmission: Chain drive, Three speed with reverse or Automatic with reverse

Please specify when ordering if you would like Three speed, or Automatic

 

Price $550.00


EXPLORER 110CC ENGINE - CARBURETOR

Click images to enlarge

Replacement part for 110cc engine on our Explorer Two Seater Go Karts.

 

Price $59.90


EXPLORER - INTAKE MANIFOLD THROAT

Click images to enlarge

TO SUIT ENGINES MODEL KD-49FM5-E and KD-110GKT-2

Intake Manifold Throat

Joint Carburetor

Diameter of Intake hole: 22mm

PCD 45mm between holes.

 

Price $24.90


EXPLORER 110CC ENGINE - CLUTCH

Click images to enlarge

To suit 110cc engines on our Explorer Drifta Two Seater 110cc Go Karts.

 

Price $79.90


EXPLORER - SPARK PLUG

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

NGK Spark plug C7HSA

 

Price $9.95


EXPLORER 110CC ENGINE - EXHAUST PIPE

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.
Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $59.90


EXPLORER AIR FILTER

Click images to enlarge

To suit 110cc engine 

Air Filter Mount: 35mm Intake

Suitable for ATV, Quads, Dirt bikes, Go Karts

 

Price $24.90


EXHAUST

Click images to enlarge

Exhaust muffler

To suit 5.5HP & 6.5HP engines.

 

Price $39.90


EXPLORER - BATTERY 12V 9AH

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $69.90


EXPLORER - IGNITION LOCK WITH KEY

Click images to enlarge

TO SUIT MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta Two Seater 110cc Go Karts.

Complete with two keys

Suitable for DIY projects, ATV's, Go Karts.

 

Price $29.90


EXPLORER - CDI

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $21.90


EXPLORER - COIL

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $24.90


EXPLORER - FLASH SYSTEM

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $18.90


EXPLORER - FRONT HEAD LIGHT

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

 

Price $30.00


EXPLORER - FRONT LED LIGHT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2

Wiring 450mm length

 

Price $39.90


EXPLORER - INDICATOR LIGHT

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

 

Price $22.00


EXPLORER - REAR BRAKE LIGHT

Click images to enlarge

TO SUIT MODEL KD-49FM5-E

 

Price $22.00


EXPLORER - REGULATOR

Click images to enlarge

Silicon Rectifier

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $21.90


EXPLORER - STARTER MOTOR

Click images to enlarge

Engine starter motor for horizontal starter motor.  

Top mount with 3 bolts

Replacement part for Explorer Drifta 110cc Two Seater Go Karts.

 

Price $69.90


EXPLORER - STARTER RELAY

Click images to enlarge

Replacement part for Explorer Drifta Two Seater 110cc Go Karts.

 

Price $27.90


EXPLORER - STATOR MAGNETO

Click images to enlarge

Stator round - 6 coil

Separate pick up coil and square 4-pin female plug

Stator used on CT (horizontal engines with electric start).

Please specify if your Explorer go kart is KD49FM5-E or KD110GKT-2 model as the attachment pins are different.

 

Price $57.90


EXPLORER - HYDRAULIC BRAKE MASTER CYLINDER

Click images to enlarge

To suit Explorer 110cc Go Karts.

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Braking System Complete.

 

Price $69.90


EXPLORER - HYDRAULIC BRAKE FLUID CUP

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

Strong plastic fluid cup to suit Brake master cylinder.

 

Price $19.90


EXPLORER - HYDRAULIC BRAKING SYSTEM COMPLETE

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts.

 

Price $195.00


EXPLORER HYDRAULIC BRAKE PADS - REAR

Click images to enlarge

Code: CD-F18A

MODEL KD-49FM5-E and KD-110GKT-2

Brake pads to suit rear brakes of Explorer 110cc Go Karts

Please check brake pads are correct before ordering

 

Price $15.90


EXPLORER HYDRAULIC BRAKE PADS - FRONT

Click images to enlarge

Code: RH-7085

MODEL KD-49FM5-E and KD-110GKT-2

Brake pads to suit front brakes of Explorer 110cc Go Karts

Please check brake codes are correct before ordering

 

Price $15.90


EXPLORER - CHAIN

Click images to enlarge

420 pitch 30 links

To suit Explorer Drifta 110cc Go Karts.

 

Price $26.90


EXPLORER - DRIVE SPROCKET

Click images to enlarge

38 tooth 160mm diameter sprocket

4 x bolt holes PCD across 58mm

PCD diagonal 80mm

To suit Explorer Drifta 110cc Go Karts.

 

Price $39.90


EXPLORER - MUDGUARD

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

To suit front & rear mudguard brackets

To suit both Explorer Drifta 110cc Go Kart models

145mm width x 350mm long

 

Price $25.90


PULL START

Click images to enlarge

Recoil Pull Start assembly.

To suit 5.5HP & 6.5HP stationary engines.

Measures 175mm diameter. Mounting bolt holes at 160mm PCD.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

 

Price $36.90


EXPLORER - MUDGUARD BRACKET FRONT - LEFT

Click images to enlarge

To suit all our Explorer Drifta 110cc Go Karts

To attach mudguard

This is the left side when sitting in the go kart.

 

Price $26.90


EXPLORER - MUDGUARD BRACKET FRONT - RIGHT

Click images to enlarge

To suit all our Explorer Drifta 110cc Go Karts

To attach mudguard

This is the right side when sitting in the go kart.

 

Price $26.90


PULL START 9.0HP

Click images to enlarge

Recoil Pull Start assembly.

To suit 9.0HP stationary engine

To suit engines on our Xtreme Drifta 270cc Go Karts.

 

Price $46.90


EXPLORER - FRONT MUDGUARD MOUNTING BRACKET LEFT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2 only

Bracket/Arm to attach front mudguard

This is the LEFT hand side when sitting in the kart.

 

Price $32.90


EXPLORER - FRONT MUDGUARD MOUNTING BRACKET RIGHT

Click images to enlarge

TO SUIT MODEL KD-110GKT-2 only

Bracket/Arm to attach front mudguard

This is the RIGHT hand side when sitting in the kart

 

Price $32.90


EXPLORER - MUDGUARD - BRACKET - LEFT - REAR

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

To suit rear wheels

To attach mudguard

This is compatible with both Explorer Drifta 110cc models 

This is the LEFT hand rear side when sitting in the kart

 

Price $26.90


EXPLORER - MUDGUARD - BRACKET - RIGHT - REAR

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

To suit rear wheels

To attach mudguard

This is compatible with both Explorer Drifta 110cc models 

This is the RIGHT hand rear side when sitting in the kart

 

Price $26.90


EXPLORER - REAR AXLE

Click images to enlarge

To suit Explorer Drifta Two Seater 110cc Go Karts

MODEL KD-49FM5-E and KD-110GKT-2

Includes sprocket mount & brake hub mount

Total length is 880mm Spline length 45mm

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $139.00


EXPLORER - FRONT DISC BRAKE PLATE

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta 110cc Go Karts

Brake Rotor

OD: 115mm

ID: 40mm

Thickness: 3mm

Holes PCD 50mm

35mm

 

Price $36.90


EXPLORER - REAR DISC BRAKE PLATE

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta Two Seater 110cc Go Karts

3mm thick

Diameter 180mm  

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $39.90


EXPLORER - REAR SHOCK ABSORBER

Click images to enlarge

These are FRONT and REAR shocks for Explorer Drifta 110cc Go Kart model KD-110GKT-2 (blue kart image)

These are the REAR shocks only for Explorer Drifta 110cc Go Kart model KD-49FM5-E (red kart image)

Total length 362mm

Eye to Eye 330mm

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

 

Price $62.90


EXPLORER - REAR HUB FLANGE

Click images to enlarge

MODEL KD-49FM5-E and KD-110GKT-2

With spline

4 x stud pattern

10mm Bolt holes

To suit Rear rims and tyres 16*8-7

 

Price $39.90


EXPLORER - REAR WHEEL BEARING CODE: 6205

Click images to enlarge

To Suit Explorer Drifta 110cc Go Karts

Code: 6205

ID 25mm

OD 52mm

Width 15mm

Double sealed

Rubber seals

 

Price $13.90


EXPLORER FRONT TYRE AND RIM - COMPLETE - 145-70-6

Click images to enlarge

To suit Explorer Drifta 110cc Go Karts - Front Wheel

Size 145/70-6

Tubeless

 

Price $69.90


EXPLORER REAR TYRE AND RIM - COMPLETE - 16X8-7

Click images to enlarge

To suit Explorer Drifta 110cc Go Karts - Rear wheels

Size 16*8-7

Tubeless

 

Price $89.90


EXPLORER - FRONT WHEEL RIM 6

Click images to enlarge

To suit front wheels of Explorer 110cc Go Karts

6" Rim to suit 145/70-6 tyres

3 stud

10mm bolt holes

PCD 80mm

172mm diameter x 100mm width

 

Price $37.90


EXPLORER - REAR WHEEL RIM 7

Click images to enlarge

To suit rear wheels of Explorer 110cc Go Karts

7 " Rim to suit 16*8-7 tyres

4 stud

10mm bolt holes

PCD 80mm

200mm diameter x 135mm width

 

Price $39.90


EXPLORER TYRE ONLY - FRONT - 145-70-6

Click images to enlarge

To suit Explorer Drifta 110c Go Karts - Front tyre

Size 145/70-6

 

Price $45.00


EXPLORER TYRE ONLY - REAR - 16X8-7

Click images to enlarge

To suit Explorer Drifta 110cc Go Karts -Rear Tyre

Size 16*8-7

 

Price $60.00


FUEL CAP

Click images to enlarge

Fuel Cap

To suit 5.5HP, 6.5HP engines.

 

Price $12.90


PETROL TANK

Click images to enlarge

To suit 5.5HP, 6.5HP engines.

Fuel tank capacity: 3.6L

 

Price $50.00


CARBURETOR

Click images to enlarge

SORRY OUT OF STOCK

 AVAILABLE 16.08.2020

YOU CAN ORDER ON BACK ORDER AND WE WILL SEND AS SOON AS WE RECEIVE NEW STOCK

Carburetor for 6.5HP engine.

Throat size 19mm & 42mm centres for mounting bracket.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

 

Price $55.90


CARBURETOR 9.0HP

Click images to enlarge

Carburetor for 9.0HP engines.

To suit our Xtreme Drifta 270cc go Kart engines.

 

Price $84.90


NGK Spark Plug BPR5ES

Click images to enlarge

NGK Spark plug BPR5ES

 

Price $9.95


3.5HP ENGINE 80cc

Click images to enlarge

80cc 4-STROKE ENGINE with recoil pull start.

To suit our Junior Drifta 80cc Go Karts.

1.2 litre fuel tank

3.5HP

Air cooled

Complete with Centrifugal Clutch

 

Price $379.00


9HP ENGINE 270cc

Click images to enlarge

OUT OF STOCK

9.0 HP stationary petrol engine.

To suit our Xtreme Drifta 270cc Go Karts.

Delivers strong power and torque

Measurements of engine: 

Length 420mm

Width 300mm

Height 420mm

Shaft diameter 25mm

Shaft length 64mm

Product features:

  • Complete with wet clutch
  • Air cooled, 4-stroke OHV
  • Recoil pull start
  • 6 litre tank
  • Bore & Stroke 77 & 58mm
  • Displacement 270cc
  • Max power 6.6kw at 3600rpm
  • 1.1 litre oil capacity

GW: 31kg NW: 29kg

 

Price $695.00


5.5HP ENGINE HONDA GX160

Click images to enlarge

OUT OF STOCK

Genuine Honda Engine GX160.

Air cooled 4-stroke OHV.

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

 

Price $649.00


6.5HP ENGINE HONDA GX200

Click images to enlarge

OUT OF STOCK

Genuine Honda Engine GX200

Air cooled 4-stroke OHV

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

 

Price $695.00


JD CENTRIFUGAL CLUTCH 80cc

Click images to enlarge

Replacement Centrifugal clutch to suit engine on our Junior Drifta 80cc Go Karts.

Also suits our Classic Junior 80cc Mini Bike engines.

11 tooth sprocket.

15mm shaft 3/8

 

Price $68.90


MB CENTRIFUGAL CLUTCH 80cc

Click images to enlarge

Replacement Centrifugal clutch to suit engine on our Junior Drifta 80cc Go Karts.

Also suits our Classic Junior 80cc Mini Bike engines.

11 tooth sprocket.

15mm shaft 3/8

 

Price $68.90


JD CLUTCH SPRING

Click images to enlarge

Replacement clutch spring for centrifugal clutch (80cc engine).

To suit our Junior Drifta 80cc Go Karts and Classic Junior 80cc Mini Bike.

 

Price $9.90


MB CLUTCH SPRING

Click images to enlarge

Replacement clutch spring for centrifugal clutch (80cc engine).

To suit our Junior Drifta 80cc Go Karts and Classic Junior 80cc Mini Bike.

 

Price $9.90


JD CARBURETOR

Click images to enlarge

Carburetor to suit 3.5HP, 80cc engines. 

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

 

Price $65.90


MB CARBURETOR

Click images to enlarge

Carburetor to suit 3.5HP, 80cc engines. 

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

 

Price $65.90


JD NGK Spark Plug

Click images to enlarge

NGK Spark Plug BM6A

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

 

Price $8.95


MB NGK Spark Plug

Click images to enlarge

NGK Spark Plug BM6A

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

 

Price $8.95


JD PULL START FOR 80cc ENGINE

Click images to enlarge

Pull start to suit 3.5HP, 80cc engines.

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

Diameter 150mm.

 

Price $37.90


MB PULL START FOR 80cc ENGINE

Click images to enlarge

Pull start to suit 3.5HP, 80cc engines.

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

Diameter 150mm.

 

Price $37.90


JD AIR FILTER

Click images to enlarge

Air Filter to suit Junior Drifta 80cc engines.

Also suits Classic Junior 80cc Mini Bikes.

 

Price $24.90


MB AIR FILTER

Click images to enlarge

Air Filter to suit Classic Mini Bike 80cc engine.

Also suits Junior Drifta 80cc Go Karts.

 

Price $24.90


JD STEERING TIE ROD

Click images to enlarge

Steering Tie Rod to suit our Junior Drifta 80cc Go Karts.

These measure 260mm eye to eye.

 

Price $32.90


Goggles

Click images to enlarge

These goggles are ideal for go karting, motocross, snowboarding, skiing.

Adjustable elastic head strap, soft padded lining beneath rims, plastic scratch resistant lenses.

One size fits all.

Please note plastic is clear not reflective

 

Price $22.00




JD STEERING SHAFT

Click images to enlarge

Steering shaft to suit our Junior Drifta 80cc Go Kart.

Total length of shaft is 440mm.

 

Price $32.90


JD STEERING WHEEL CONNECTION HOLDER

Click images to enlarge

Steering wheel connection holder to suit our Junior Drifta 80cc Go Karts.

Length is 100mm

65mm flange

3 holes on flange 30mm apart

This fits inside steering shaft to attach steering wheel.

 

Price $19.90


JD NYLON MOUNT FOR STEERING SHAFT

Click images to enlarge

To suit our Junior Drifta 80cc Go Karts.

 

Price $16.90


JD THROTTLE CABLE

Click images to enlarge

Throttle cable  to suit our Junior Drifta 80cc Go Karts.

1440mm length

 

Price $24.90


MINI BIKE THROTTLE CABLE

Click images to enlarge

Throttle cable  to suit our Classic Junior 80cc Mini Bikes.

 

Price $24.90


JD HYDRAULIC BRAKE UNIT COMPLETE

Click images to enlarge

Hydraulic brake unit complete  to suit our Junior Drifta 80cc Go Karts.

This unit is complete and just needs to be attached to kart

Total length of brake unit is 1460mm

Please note: Actual brake hose from Junior Drifta is black colour, and hydraulic fluid is in a plastic container, slightly different from the image pictured.

 

Price $81.90


JD DISC BRAKE PLATE

Click images to enlarge

Disc Brake plate  to suit our Junior Drifta 80cc Go Karts.

160mm diameter 2.5mm thichness

Centre hole 30mm diameter

6 stud holes, distance between stud holes is 20mm.

 

Price $31.90


JD TRANSMISSION CHAIN LARGE code 0410000

Click images to enlarge

Transmission chain large  to suit our Junior Drifta 80cc Go Karts.

41 links

 

Price $24.90


Ultimate Drifta 200cc Go Kart Black

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: Recommended maximum weight- 120kg
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,550.00


Ultimate Drifta 200cc Go Kart Yellow

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,550.00


JD TRANSMISSION CHAIN SMALL code 0409000

Click images to enlarge

Transmission chain small to suit our Junior Drifta 80cc Go Karts.

25 links

 

Price $19.90


MINI BIKE TRANSMISSION CHAIN

Click images to enlarge

Drive chain to suit our Classic Junior 80cc Mini Bikes

67 links

 

Price $28.90


JD DRIVE SPROCKET LARGE code 0415000

Click images to enlarge

Drive sprocket large to suit Junior Drifta 80cc Go Karts.

200mm diameter

65 tooth

25mm centre hole

 

Price $37.90


Honda Drifta Go Kart Red

Click images to enlarge

Features
Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,495.00


JD DRIVE SPROCKET MEDIUM code 0406000

Click images to enlarge

Drive sprocket medium to suit Junior Drifta 80cc Go Karts.

125mm diameter

40 tooth

25mm centre hole

 

Price $34.90


JD DRIVE SPROCKET SMALL code 0407000

Click images to enlarge

Drive sprocket small to suit Junior Drifta 80cc Go Karts.

75mm diameter

24 tooth

 

Price $39.90


JD REAR AXLE SHAFT

Click images to enlarge

Rear axle shaft to suit our Junior Drifta 80cc Go Karts.

Total length is 750mm

Diameter is 25mm in centre, tapers to 20mm

135mm to first step

Axle is keyed (Not splined)

 

Price $79.90


Honda Drifta Go Kart Blue

Click images to enlarge

Features
Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,495.00


JD SEATBELT

Click images to enlarge

Lap seat-belt to suit our Junior Drifta 80cc Go Kart.

2 bolting points.

 

Price $24.90


JD WHEEL RIM - FRONT

Click images to enlarge

Front wheel rim to suit Junior Drifta 80cc Go Kart.

Complete with 15mm bearing

To suit 13*5.00-6 tyres

170mm Diameter x 98mm Width

 

Price $38.00


JD WHEEL RIM - REAR

Click images to enlarge

Rear wheel rim to suit Junior Drifta 80cc Go Kart.

Complete with keyway

To suit 13*5.00-6 tyres

170mm Diameter x 98mm Width

 

Price $38.00


Honda Drifta Go Kart Yellow

Click images to enlarge

Features
Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,495.00


JD TYRE & RIM COMPLETE - FRONT 13*5.00-6

Click images to enlarge

Front tyre & rim complete with bearings to suit Junior Drifta 80cc Go Karts.

Knobbly tyre tread

 

Price $59.00


JD TYRE & RIM COMPLETE - REAR 13*5.00-6

Click images to enlarge

Rear Tyre & rim complete with spline to suit Junior Drifta 80cc Go Karts.

Knobbly tyre tread

 

Price $59.00


Honda Drifta Go Kart Black

Click images to enlarge

Features
Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,495.00


MINI BIKE & JUNIOR DRIFTA ON / OFF SWITCH AND WIRING

Click images to enlarge

To suit our Junior Drifta 80cc Go Kart and Classic 80cc Mini Bike

Cable length 163cm

Ideal for any DIY building projects.

Ideal if you are modifying your kart, home-built karts or other projects. 

 

Price $25.00


MINI BIKE & JUNIOR DRIFTA ON / OFF SWITCH AND WIRING

Click images to enlarge

To suit our Junior Drifta 80cc Go Kart and Classic 80cc Mini Bike

Cable length 163cm

Ideal for any DIY building projects.

Ideal if you are modifying your kart, home-built karts or other projects. 

 

Price $25.00


MINI BIKE SPRING FOR KICKSTAND

Click images to enlarge

Replacement spring for kickstand for our Classic Junior 80cc Mini Bikes.

 

Price $5.00


OPTIONAL EXTRA - FRONT BUMPER BAR

Click images to enlarge

OUT OF STOCK

More stock available 02.08.2020.

Please order and we will send as soon as possible

Steel Front Bumper Bar

Protects front frame and steering tie rods.

Easy to bolt on to front frame.

To suit our own Drifta karts with serial # LAKS.. and YKHM2019..

See image on left to see how it looks once fitted onto our go-karts.

Please click on image to enlarge.

96cm across.

 

Price $85.00


Caged Drifta 200cc Go Kart Red

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 - 50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight- 75kg, gross weight 85kg

Packaging dimensions: 115cm L x 98cm W x 55cm H

Assembled dimensions: 98cm Width x 163cm Length x 133cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,395.00


Caged Drifta 200cc Go Kart Blue

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 - 50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight- 75kg, gross weight 85kg

Packaging dimensions: 115cm L x 98cm W x 55cm H

Assembled dimensions: 98cm Width x 163cm Length x 133cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,395.00


Caged Drifta 200cc Go Kart Black

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 - 50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight- 75kg, gross weight 85kg

Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 133cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,395.00


Caged Drifta 200cc Go Kart Yellow

Click images to enlarge

Features
Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 - 50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight- 75kg, gross weight 85kg

Packaging dimensions: 115cm L x 98cm W x 55cm H

Assembled dimensions: 98cm Width x 163cm Length x 133cm Height


All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,395.00


Adventurer Drifta 150cc Two Seater Buggy - Black

Click images to enlarge

Features
Engine Type: 150cc, single cylinder, 4 stroke air cooling
Power: 6.5kw/7500rpm
Max torque:10.5N.m/4500rpm
Transmission: Chain drive, Automatic with reverse
Start: Electric Battery: 12v.9Ah
Brakes: Front & rear hydraulic brakes
Frame: High tensile steel
Suspension: Front & rear twin shocks
Max Speed: 65km/h
Fuel Capacity: 6L/Unleaded
Guards: Front & rear mudguards
Front/Rear wheel: 1310/960mm
Front/Rear tyre: 21*7-10/22*11-10
Lights: Front dual headlights, Rear stop lights.
Wheelbase: 1885mm
Overall size: Length 2450mm Width 1510mm Height 1580mm
Weight: NW: 255kg GW: 328kg


Assembly: These come part assembled and require some assembling. They are a fun activity and good team project for the family. Alternatively we can fully assemble at our factory. Please contact us for assembly pricing and freight charges. 

Price $3,995.00


Explorer Drifta 110ccTwo Seater Buggy Red

Click images to enlarge

Features
Engine Type: 110cc, single cylinder, 4 stroke air cooled petrol
Power: 4.6kw/7500rpm
Max torque:6.5N.m/5500-6500rpm
Transmission: Chain drive, Three speed with reverse or Forward/Reverse
Start: Electric Battery: 12v.9Ah
Brakes: Front & rear hydraulic brakes
Frame: High tensile steel
Suspension: Front & rear twin shocks
Max Speed: 40-45km/h

Max load: (Recommended maximum weight) 150kg

Fuel Capacity: 2L/Unleaded petrol

Guards: Front & rear mudguards
Front Tyres : 145/70-6
Rear Tyres: 16x8.7
Lights: Front dual headlights, Rear stop lights.
Wheelbase: 1560mm
Assembled Dimensions: 190cm Length x 110cm Width x 130cm Height (to top of roll cage)
Packaging Dimensions: Box size- 178cmL * 114cmW * 64cmH (Steel boxed framing)
Weight: NW: 132kg GW: 182kg
Assembly: These come part assembled and require some assembling. They are fairly easy to put together, a fun activity and good team project for the family. Alternatively we can fully assemble at our factory. Please contact us for pricing and freight charges.

Price $2,495.00


Explorer Drifta 110cc Two Seater Buggy Blue

Click images to enlarge

Features
Engine Type: 110cc, single cylinder, 4 stroke air cooled petrol
Power: 4.6kw/7500rpm
Max torque:6.5N.m/5500-6500rpm
Transmission: Chain drive, Three speed with reverse or Forward/Reverse
Start: Electric Battery: 12v.9Ah
Brakes: Front & rear hydraulic brakes
Frame: High tensile steel
Suspension: Front & rear twin shocks

Max Speed: 40-45km/h

Max load: (Recommended maximum weight) 150kg

Fuel Capacity: 2L/Unleaded petrol
Guards: Front & rear mudguards
Front Tyres : 145/70-6
Rear Tyres: 16x8.7
Lights: Front dual headlights, Rear stop lights.
Wheelbase: 1560mm
Assembled Dimensions: 190cm Length x 110cm Width x 130cm Height (to top of roll cage)
Packaging Dimensions: Box size: 178cmL * 114cmW * 64cmH (Steel boxed framing)
Weight: NW: 132kg GW: 182kg
Assembly: These come part assembled and require some assembling. They are fairly easy to put together, a fun activity and good team project for the family. Alternatively we can fully assemble at our factory. Please contact us for pricing and freight charges.

Price $2,495.00


Explorer Drifta 110cc Two Seater Buggy Black

Click images to enlarge

Features
Engine Type: 110cc, single cylinder, 4 stroke air cooled petrol
Power: 4.6kw/7500rpm
Max torque:6.5N.m/5500-6500rpm
Transmission: Chain drive, Three speed with reverse or Forward/Reverse
Start: Electric Battery: 12v.9Ah
Brakes: Front & rear hydraulic brakes
Frame: High tensile steel
Suspension: Front & rear twin shocks

Max Speed: 40-45km/

Max load: (Recommended maximum weight) 150kg

Fuel Capacity: 2L/Unleaded petrol

Guards: Front & rear mudguards

Front Tyres : 145/70-6 

Rear Tyres: 16x8.7

Lights: Front dual headlights, Rear stop lights.

Wheelbase: 1560mm 

Assembled Dimensions: 190cm Length x 110cm Width x 130cm Height (to top of roll cage)
Packaging Dimensions: Box size: 178cmL * 114cmW * 64cmH (Steel boxed framing)
Weight: NW: 132kg GW: 182kg
Assembly: These come part assembled and require some assembling. They are fairly easy to put together, a fun activity and good team project for the family. Alternatively we can fully assemble at our factory. Please contact us for pricing and freight charges.

Price $2,495.00


Adventurer Drifta 150cc Two Seater Buggy - Red

Click images to enlarge

Features
Engine Type: 150cc, single cylinder, 4 stroke air cooling
Power: 6.5kw/7500rpm
Max torque:10.5N.m/4500rpm
Transmission: Chain drive, Automatic with reverse
Start: Electric Battery: 12v.9Ah
Brakes: Front & rear hydraulic brakes
Frame: High tensile steel
Suspension: Front & rear twin shocks
Max Speed: 65km/h
Fuel Capacity: 6L/Unleaded
Guards: Front & rear mudguards
Front/Rear wheel: 1310/960mm
Front/Rear tyre: 21*7-10/22*11-10
Lights: