Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with padded roll cage, leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

Price $1,695.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,450.00

Centrifugal clutch with inbuilt 5mm keyway.

To suit 5.5HP & 6.5HP engines.

Dry centrifugal clutch.

Bore 19.05mm (3/4 inch). 10 tooth, 420 pitch.

To suit engines for our Sportz, Honda & Caged Drifta Go Karts.

Price $68.90

OUT OF STOCK

Brand New to NZ market.

Features:

New easy turning system.

Front Spot +LED Light.

LCD Data Display with digital speedometer, rpm counter, distance odometer, temperature gauge.

Steel rim with colourful rim cover.

Front & Rear Cargo Rack. Front Anti-Collision Frame.

Specifications:

Motor Type: 125cc, Single cylinder, Air-cooled, petrol

Start System: Electric Start

Ignition: CDI

Battery:   12V/4Ah

Fuel capacity: 2.2L

Max power: 5.3kw/7500r/min

Max torque: 8.0Nm/6500r/min

Gears: D-N-R

Transmission: Chain Drive

Front brake: Double Drum brakes

Rear brake: Single Disc brake

Front Suspension: Independent double shock absorber

Rear Suspension: Single shock absorber

Tyres:  Front 19x7-8 / Rear 18x9.5-8

Max. speed: 60km/h

Max. load: 100kg

Seat height: 67cm

Wheelbase: 970mm

Ground Clearance: 100mm

Overall Size (L*W*H): 1500 x 970 x 965mm

Packaging size: 1310 x 770 x 620mm

Unit Weight: NW:120kg

Recommended age: 10years +

This item comes in a steel framed carton and requires assembly.

We can fully assemble in our workshop for you for an additional fee. (Pick ups only)

Price $1,895.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

Price $1,595.00

Features and Specifications:
8 hooks inside
Two adjustable and detachable Saddle Holders
External Telescopic Saddle bar
Comfortable bar for easy pushing and pulling
Stamping panel for an easy push up start
Vents to allow moisture to escape
Heavy duty wheels
Convenient mirror
Multi-compartment grooming box at top
Lightweight for easy transport
Rigid frame of tubular steel
Exterior: Super strong high density polyethylene (HDPE)
Fully secure-lockable with 2 keys supplied
Width 582mm
Depth 781mm
Height 1170mm
Weight 26kg

Please contact us if you have any questions.

Price $795.00

Features:

Engine Type: single cylinder air cooled, 4-stroke, 270cc

Displacement: 270cc
Power: 9.0hp
Drive System: Direct drive axle
Suspension: Front twin shocks with rack & pinion. Rear twin mono shocks swing arm. 
Starting system: Pull start
Clutch type: Centrifugal wet 2:1 reduction gear box
Front Tyres: 13*5-6 turf tyre
Rear tyres: 15*6.5-6 turf tyre
Brake System: Dual front hydraulic brake. Rear hydraulic disc brake. 
Fuel Tank Capacity: 6 Litre
Max speed: 55km/h
Fuel type: Unleaded petrol 95/98
Pay load: 160kg

Wheelbase: 1315mm

Ground clearance: 120mm

Some assembly required.

Packaging: NW: 110kg GW: 120kg
Packaging Dimensions: Box size: 135cmL x 115cmW x 63cmH
Assembled Dimensions: 207cmL x 107cmW x 80cmH
Colours available: BLUE, BLACK

Price $2,350.00

OUT OF STOCK UNTIL JANUARY 2025

Features:

Engine: Single cylinder, air cooled 4-stroke OHV
Displacement: 80cc
Power: 2.5hp
Drive System: Direct drive axle
Starting system: Recoil pull start
Clutch type: Centrifugal dry
Tyres: 13*5-6 off road knobbly tyres
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 1.5 litre
Max speed: 24km/h
Fuel type: Unleaded petrol 95/98
Pay load: Recommended maximum weight- 70kg
Packaging: NW: 60kg, GW: 80kg
Packaging dimensions: 1400mm Length x 850mm Width x 650mm Height
Assembled dimensions: 1400mm Length x 850mm Width x 650mm Height
The seat is adjustable from front to back

Distance from pedals to back of seat when seat is fully forward: 650mm

Distance from pedals to back of seat when seat is fully back: 750mm

Price $1,495.00

OUT OF STOCK UNTIL JANUARY 2025

Features:

Engine: Single cylinder, air cooled 4-stroke OHV
Displacement: 80cc
Power: 2.5hp
Drive System: Direct drive axle
Starting system: Recoil pull start
Clutch type: Centrifugal dry
Tyres: 13*5-6 off road knobbly tyres
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 1.5 litre
Max speed: 24km/h
Fuel type: Unleaded petrol 95/98
Pay load: Recommended maximum weight- 70kg
Packaging: NW: 60kg, GW: 80kg
Packaging dimensions: 140cm Length x 85cm Width x 65cm Height
Assembled dimensions: 140cm Length x 85cm Width x 65cm Height

The seat is adjustable from front to back

Distance from pedals to back of seat when seat is fully forward: 650mm

Distance from pedals to back of seat when seat is fully back: 750mm

Price $1,495.00

Brand new to NZ market. 

INTRODUCTORY OFFER NOW, DISCOUNTED PRICE

Features:

Simple frame design

500W High Torque Chain Driven Motor

Twist-grip Acceleration Control

Rechargeable Lead Acid Battery System with Quick Change Compartment

Latest electrics technology. Long Running Distance. Power Brush Motor.

Light weight & very easy for children to operate, comes with added feature of LED night lights.

Specifications:

Motor Type: 36V/500W Brush Motor

Transmission: Chain Drive

Rated voltage: 36V

Charger: AC100-240V 50/60Hz 1.2A

Charge Time: 6H

Run Distance per charge: 18km

Max. Speed: 20km/h

Max. Load: 60kg

Seat Height: 600mm

Wheelbase: 590mm

Ground clearance: 85mm

Brakes Rear: Hand Disc Brake

Front & Rear Tyre: 16x4.5-7 / 14x5.5-6

Overall Size (L*W*H): 1235 x 730 x 910mm

Packaging size: 1150 x 685 x 590mm

Unit Weight: GW: 66kgs NW: 59kgs

Recommended age: 5-11years

Please enquire for freight prices to your delivery area. we welcome pick ups.

Final assembly required

Price $895.00

Clutch Spring

To suit centrifugal clutch as pictured above.

Price $12.90

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

Price $1,595.00

Features:

Engine: Single cylinder, air cooled 4-stroke OHV
Displacement: 98cc
Power: 3.5hp
Drive System: Direct drive axle
Starting system: Recoil pull start
Clutch type: Centrifugal dry
Tyres: 13*5-6 off road knobbly tyres
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 1.6 litre
Max speed: 28km/h
Fuel type: Unleaded petrol 95/98

Engine oil type: SAE10W-30
Pay load: Recommended maximum weight- 70kg
Packaging: NW: 60kg, GW: 80kg
Packaging dimensions: 1400mm Length x 850mm Width x 650mm Height
Assembled dimensions: 1380mm Length x 820mm Width x 980mm Height

The seat is adjustable from front to back

Distance from pedals to back of seat when seat is fully forward: 650mm

Distance from pedals to back of seat when seat is fully back: 820mm

Price $1,550.00

Features:

Engine Type: single cylinder air cooled, 4-stroke, 270cc

Displacement: 270cc
Power: 9.0hp
Drive System: Direct drive axle
Suspension: Front twin shocks with rack & pinion. Rear twin mono shocks swing arm. 
Starting system: Pull start
Clutch type: Centrifugal wet 2:1 reduction gear box
Front Tyres: 13*5-6 turf tyre
Rear tyres: 15*6.5-6 turf tyre
Brake System: Dual front hydraulic brake. Rear hydraulic disc brake. 
Fuel Tank Capacity: 6 Litre
Max speed: 55km/h
Fuel type: Unleaded petrol 95/98
Pay load: 160kg

Wheelbase: 1315mm

Ground clearance:120mm
Some assembly required.

Full Roll cage with padding & sun cover. Roll cage can be easily removed.
Packaging: NW: 110kg GW: 120kg
Packaging Dimensions: Box size: 135cmL x 115cmW x 63cmH
Assembled Dimensions: 207cmL x 107cmW x 137cmH
Colours available: BLUE, BLACK

Price $2,490.00

Throttle cable for Drifta Go Karts.

This is suitable for use as an accelerator cable or a manual disc brake cable.

Extra long cable.

2.35 Metre length

Replacement part for our single seater Drifta Go Karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $18.90

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension 
Starting system: Recoil Pull start
Clutch Type: Strong Wet clutch with 2:1 reduction gear box
Tyres: (Front/Rear) 6" pneumatic road/turf tread
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts come with leg and foot protector, padded coloured seat cover, 3-point safety harness, and front bumper bar.

Price $1,595.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,450.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,450.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45-50 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight: 75kg, gross weight 85kg
Packaging Dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,450.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,695.00

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,695.00

Features:

Motor: 500W brushless motor (Rated continuous output power)

Gearing: Forward, Neutral, Reverse

Speed limit: Parental control 3 speed adjustable by key

3 speeds: Low 10km/h, Medium: 20km/h, High: 30km/h

Battery: Powerful 48V20Ah Lead acid battery

(Rated voltage 48V) (Rated output toque 1.7 (Nm))

Charge time: 5 hours

Run time: (battery range) 90 minutes depending on rider weight & terrain

Frame: High tensile tubular steel

Tyres: 13*5-6 knobbly tyres

Brake system: Rear Hydraulic brakes on both rear wheels

Meter: Intelligent LED indicator panel

Max Speed: 25km/h, 3 speed with reverse gear

2-point seat belt

Packaging: NW: 100kg, GW: 110kg

Load capacity: 100kg

Packaging dimensions: 115cm L x 92cm W x 52cm H

Assembled dimensions: 145cm Length x 97cm Width x 100cm Height (top of roll hoop)

Please note: The warranty on this machine is three months on main parts such as frame, steering, suspension, switches, wheels, motors, steering wheel, brakes, and seats.

We do not cover wear and tear items such as tyres, batteries, cables, brake levers or moving parts.

Accidental damage, abuse, or issues with lack of maintenance and improper use will void warranty.

Assembly: 

These karts come part assembled in the box and require some assembly. They are easy to put together, or we can fully assemble at our warehouse if you are collecting. Please contact us for pricing and freight charges.

Price $1,795.00

Features:

Motor: 500W brushless motor (Rated continuous output power)

Gearing: Forward, Neutral, Reverse

Speed limit: Parental control 3 speed adjustable by key

3 speeds: Low 10km/h, Medium: 20km/h, High: 30km/h

Battery: Powerful 48V20Ah Lead acid battery

(Rated voltage 48V) (Rated output toque 1.7 (Nm))

Charge time: 5 hours

Run time: (battery range) 90 minutes depending on rider weight & terrain

Frame: High tensile tubular steel

Tyres: 13*5-6 knobbly tyres

Brake system: Rear Hydraulic brakes on both rear wheels

Meter: Intelligent LED indicator panel

Max Speed: 25km/h, 3 speed with reverse gear

2-point seat belt

Packaging: NW: 100kg, GW: 110kg

Load capacity: 100kg

Packaging dimensions: 115cm L x 92cm W x 52cm H

Assembled dimensions: 145cm Length x 97cm Width x 100cm Height (top of roll hoop)

Please note: The warranty on this machine is three months on main parts such as frame, steering, suspension, switches, wheels, motors, steering wheel, brakes, and seats.

We do not cover wear and tear items such as tyres, batteries, cables, brake levers or moving parts.

Accidental damage, abuse, or issues with lack of maintenance and improper use will void warranty.

Assembly: 

These karts come part assembled in the box and require some assembly. They are easy to put together, or we can fully assemble at our warehouse if you are collecting. Please contact us for pricing and freight charges.

Price $1,795.00

8cm distance between 3 stud holes which are 10mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines. OD of flange is 104mm. Height of Rear Wheel hub is 45mm 

Rear wheel hubs for Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's or ideal for any DIY project. 

Price $36.90

Front wheel hub complete with bearing.

ID of bearing is 17mm.

80mm distance between 3 stud holes which are 10mm.

These are compatible with our Front connecting arms with a 17mm shaft. OD of flange is 104mm.

Height of Front Wheel Hub is 45mm. 

Ideal for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

These are good quality one piece fittings.

Price $38.90

Bearing to suit Front wheel hub (as shown above).

The price is for 2 bearings.

Code: 6003

ID of bearing is 17mm

OD of bearing is 34mm

Price $19.90

To suit our Drifta single seater Go Kart Wheel Hubs

12 x 10mm bolts 25mm long

12 x flat washers

12 x spring washers

12 x locking nuts

Price $19.90

To suit our Drifta single seater Go Kart Wheel Hubs

3 x 10mm bolts 25mm long

3 x flat washers

3 x spring washers

3 x locking nuts

Price $6.90

Front Connecting Arm/ Front Stub Axle/ Front Spindle for our single seater Drifta Go Karts (excluding Junior Drifta 80cc Go Kart).

Ideal for any DIY building project.

Compatible with our Front wheel hubs & tie rods. Shaft length 72mm Shaft diameter 17mm

Please note: The left side is the Left hand side when sitting in the drivers seat.

Price $35.90

Front Connecting Arm/ Front Stub Axle/ Front Spindle for our single seater Drifta Go Karts (excluding Junior Drifta 80cc Go Kart).

Ideal for any DIY building project.

Compatible with our Front wheel hubs & tie rods. Shaft length 72mm Shaft diameter 17mm

Please note: The right side is the Right hand side when sitting in the drivers seat.

Please note Castle/Axle nuts are sold separately as a pair.

Scroll down below this listing if you would like to purchase Castle/Axle nuts.

Price $35.90

High quality stainless steel plate which is 3.0mm thick.

OD is 180mm. ID of centre hole is 38mm.

Brake Plate for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our Right Hub Brake & Rear Axles.

To suit our STANDARD HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER & XTREME HYDRAULIC BRAKE UNITS.

Price $36.90

Brake Disc Plate complete with right brake hub.

High quality stainless steel plate which is 3.0mm thick.

OD is 180mm.

ID of centre hole of Brake Plate is 38mm.

Comes complete with bolts.

To suit our Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's.

Ideal for any DIY project. Compatible with our Rear Axles.

Price $67.90

25mm distance between 6 bolt holes which are 5mm.

Inside diameter is 25mm with splines.

These are compatible with our Rear Axles 880mm & 980mm with splines.

OD of flange is 60mm. Height of Right Hub Brake is 45mm.

Right Hub Brake for Drifta Go Karts, Grass Karts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Compatible with our brake plate.  

Price $35.90

Cable operated caliper comes complete with brake pads.

Mechanical cable brake.
Suitable for 2mm brake disc plates.

Distance between mounting bracket holes centre to centre is 52mm.

Suitable for Grass Karts, Sliders, Carts, Drift Trikes, Trolley's or ideal for any DIY project.

Price $35.90

To suit REAR DISC BRAKE ASSEMBLY.

(Mechanical cable brake system).

Rear Disc Brake Assembly pictured above.

Please note: Some brake pads for this brake assembly are rectangular shape.

Please specify when ordering if you need the rectangular pads.

Price $10.00

To suit smaller Go Kart Hydraulic brake units. (Not Xtreme Hydraulic brake units).

(Please note: this smaller brake unit is now obsolete)

Please note: Go Kart frames starting with serial # ZJLH had this smaller brake unit.

Price $12.00

Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.

To suit butterfly steering wheels on Drifta Go Karts.

Brake hose length 140cm from caliper to handle. Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)

Easy to install, Just bolt on.

Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS... or YKHM2019...

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Price $72.90

To suit Standard Hydraulic Brake Unit Complete With Hand Lever (pictured above)

Go Kart frames starting with serial # LAKS... and YKHM2019...

(Code on brake pads YL-F328 or HMZ-7006)

Price $15.00

To suit Standard Hydraulic Brake Unit Complete with Hand Lever - LAKS serial.

Available in different colours of go karts.

Mounting holes are 40mm apart, holes drilled to suit brake caliper above.

Price $24.90

XTREME HYDRAULIC BRAKE UNIT COMPLETE WITH HAND LEVER
Suitable for 2.5-3mm brake disc plate.
Brake hose length 160cm from caliper to handle.
To suit brake units for Go Kart frames starting with serial # ZJLH. (These are not the standard unit for our own Drifta Go Karts with serial # LAKS... or YKHM2019... They can be used if adapted with a replacement brake bracket.)

For ZJLH... or LW-GK Drift Go Karts 2013 or older you will need a brake bracket to attach these brake units.( The original brake units on these karts are now obsolete)

These Xtreme Brake Units are ideal if you are building your own kart.

Suitable for Drift Go Karts, Grass Karts, Off Road Karts, Sliders, Carts, Drift Trikes & Trolley's. Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Comes complete with Xtreme Hydraulic Brake Pads

These brake pad codes below will fit this brake unit:

Code TL-F305

Code RH-7067

Code WF-021

Price $74.90

XTREME HYDRAULIC BRAKE UNIT COMPLETE SUITABLE FOR FOOT PEDAL

These are designed for use with Foot pedals.

Brake hose length 125cm from caliper to handle.

Comes complete with Xtreme Hydraulic Brake Pads

(Code TL-F305) or (RH-7067) or (WF-021)

Compatible with our 2.5-3mm Brake Disc Plate

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes,Trolley's or Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $94.90

To suit Xtreme Hydraulic Brake Units (hand lever or foot units)

Code on brake pads can be:

TL-F305

RH-7067

WF-021 

Price $15.00

Use this to mount Xtreme  Hydraulic Brake Units to chassis.

PCD 65mm

Price $10.00

Compatible with Xtreme Hydraulic Foot Brake Unit.

190mm Length

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $24.90

AXLE BEARING (each)

UC 205

Inside diameter(ID) 25mm

Outside diameter (OD) 50mm

Comes with grub screws.

Compatible for use with our Rear Axle Shaft 880mm & 980mm

Ideal for any DIY project and suitable for 25mm axle.

Price $18.90

30mm thick in centre tapering to 25mm at end with spline.

Length: 880mm

23 points on splines

Length of splines: 95mm

Centre part of axle before step down is 525mm

Compatible with our own Drifta brand Go Karts (serial # LAKS... or YKHM2019...)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $90.00

30mm thick in centre tapering to 25mm at end with spline.

Length: 980mm 

23 points on splines

Length of splines: 145mm

Centre part of axle before step down is 525mm

Extra Long Rear Axle

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $95.00

This Rear Axle Kit includes 1 x 880mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Axle Spacer-Short, 2 x Castle Nuts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's  

Ideal for building/modifying your own Go Kart or any DIY project.

Price $295.00

This Rear Axle Kit includes 1 x 980mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Castle Nuts, 2 x Spacers

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's. 

Ideal for building/modifying your own Go Kart or any other DIY project.

Price $299.00

To suit 25mm Axle, these are sold as a pair.

ID: 25mm

OD: 32mm

Width is 20mm.

Price $8.90

To suit 25mm Axle, these are sold as a pair.

ID: 25mm

OD: 37mm

Width is 50mm.

Price $15.90

Axle Nuts suitable for Rear Axle and Front Connecting arms ( ID:15mm).

Sold as a pair.

To suit our Drifta Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $2.90

Bearing bracket/holder 

AVAILABLE IN BLACK COLOUR

The price is for 2 brackets only.

Inside diameter: 50mm

Distance between 3 bolt holes is 65mm.

Compatible with our Drifta brand Go Karts (serial # LAK) and components.

Ideal for DIY Drift Go Karts, Buggies, Trolleys.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $19.90

Chain 31 link 

420 pitch drive chain 80cm length

To suit Go Kart frames with a 6.5HP Engine with dry centrifugal clutch starting with serial # LAKS.... and YKHM....

(Sportz Drifta 200cc,  Honda Drifta 163cc)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $24.90

Chain 30 link

420 pitch drive chain.

To suit Go Kart frames starting with serial # ZJLH.

Price $24.90

Chain 36 link

420 pitch drive chain

Compatible with Trail Blazer, Caged Trail Blazer, Blazer & Ultimate Drifta Go Karts.

To suit Go Kart frames with a 6.5HP Engine with wet clutch, serial # LAKS.... amd YKHM....

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $26.90

Chain 40 link

420 pitch drive chain

To suit Go Kart frames with a 9.0HP Engine with wet clutch, serial # LAKS.... and YKHM....

Compatible with Xtreme Drifta 270cc Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $27.90

Chain drive joiner link

420 Pitch

To fit chains on our 6.5HP and 9.0HP Drifta Karts.

(Chains displayed above)

Price $1.90

Left Hub Chain for our Drifta single seater Go Karts.

(excluding Junior Drifta 80cc Go Karts).

Compatible with our Chain Drive Sprocket & Rear Axles. High quality stainless steel which is 6mm thick.

Outside Diameter is 95mm Height is 45mm. ID of centre bore is 25mm with spline.

4- hole stud pattern with distance between centre of holes 57mm. 10mm holes.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $35.90

48 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts, Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Price $36.90

54 tooth 420 rear sprocket 

Chain Sprocket for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Left Hub Chain & Rear Axles. High quality stainless steel which is 6mm thick. Outside Diameter tip to tip is  220mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Price $42.90

48 tooth 420 rear sprocket 

Chain Sprocket complete with left chain hub for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Rear Axles and chains. Chain drive sprocket is high quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Come complete with bolts, nuts and washers.

Price $67.90

To suit our Sportz, Caged, and Honda Drifta Go Karts with dry centrifugal clutch engine.

Easy to bolt on.

Price $34.90

To suit our Trail Blazer, Blazer, and Ultimate Drifta Go Karts with wet clutch engine.

Easy to bolt on.

Price $34.90

Total length: 210mm

Eye to eye: 180mm 

To suit our own Drifta Go Kart frames starting with serial # LAKS... or YKHM2019...

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts, trolley's or other DIY projects.

Price $29.90

Total length: 210mm.

Eye to eye: 180mm
To suit Go Kart frames starting with serial # ZJLH.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts, trolley's or other DIY projects.

Price $29.90

Replacement air filter for 5.5 & 6.5HP Honda or Honda design engines. 

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Drifta single seater 200cc Go Kart engines.

Price $18.90

Replacement air filter for 9.0HP Engine

Suitable for 4-stroke petrol engines with a horizontal shaft.

To suit our Xtreme Drifta 270cc single seater Go Kart engines.

Price $26.90

This is the complete air filter assembly.

Includes air filter and plastic casing.

This will fit most 5.5 & 6.5HP petrol engines. The bolt holes are approximately 44mm apart.

Price $39.90

This is the complete air filter assembly.

Includes air filter and plastic casing.

This will fit most 9.0HP petrol engines. 

Price $49.90

KILL SWITCH on/off

Compatible with KILL SWITCH WIRING (below).

Attaches to Steering Wheel (Butterfly style) on Drifta Go Karts.

A good safety feature with KILL SWITCH WIRING to add to any motorised product.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $12.90

KILL SWITCH WIRING to attach to KILL SWITCH on/off

Length of wiring is 170cm

Attaches to wiring on engine.

A good safety feature with KILL SWITCH on/off to add to any motorised product.

Compatible with Drifta Go Karts

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $15.90

Throttle / Accelerator handle.

Attaches to our Steering wheel - Drifta (Butterfly style)

Used as a throttle handle for our Drifta brand karts with hand controls.

Can be used with a cable for a mechanical brake system (Rear Disc Brake Assembly).

Please note: This is not a handle for our Hydraulic brake units.

Price $19.90

Butterfly Style or Formula One Steering Wheel.

Please note colour of steering wheel is now BLACK not SILVER  (earlier models of DRIFTA karts)

340mm Across x 170mm Height

Distance between 3 mounting holes to attach to steering shaft is 33mm.

Compatible with our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Attaches to Steering Column.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $39.90

Dimensions: 310mm Width x 260mm Height.

Distance between 6 bolt holes to attach to steering shaft/column is 35mm

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Please note: centrepiece may be RED or BLUE

Price $49.00

Includes steering wheel, steering column with fittings and kill switch.

Please note colour of steering wheel is now BLACK

Compatible with all our Drifta single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $95.90

Steering column 540mm long.

Distance between 3 mounting holes to attach to steering wheel is 33mm.

Compatible with our Steering Wheel (Butterfly style) for our own Drifta brand karts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $39.90

Steering column with fittings 540mm long.

Includes bottom plate.

Distance between 3 mounting holes to attach to steering wheel is 33mm.

Compatible with our Steering Wheel (Butterfly style) for our own Drifta brand karts

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $59.90

Replacement bottom plate for steering column with fittings, and steering handle assy complete.

Attach to steering tie rod from steering column.

92mm length.

Price $9.90

This Accelerator Plate / Throttle control is suitable for 5.5HP & 6.5HP engines.

Replacement part for our Drifta single seater Go Karts.

The plate/lever is compatible for attaching Throttle cable to engine on Go Karts or Grass Karts.

Price $25.90

Ignition system / coil for 5.5HP & 6.5HP petrol engines (Transitorized magneto).

To suit 6.5HP engines on our Drifta 200cc Go Karts.

Price $49.90

Ignition system / coil for 9.0HP petrol engines (Transitorized magneto).

To suit 9.0HP engines on our Xtreme Drifta 270cc Go Karts.

Price $54.90

Spark plug cap for 5.5 , 6.5HP and 9.0HP petrol engines.

Price $9.90

DUST CAP for Drifta Go Kart wheels hubs.

The price is for 1 dust cap.

Price $5.90

Dust cap washer to suit Drifta Go Karts

Sold as a pair.

Price $2.90

Go Kart Seat

Approx. 440mm Across x 360mm Height

Compatible with all our Drifta single seater Go Karts excluding Junior Drifta 80cc Go Karts.

Heavy Duty Strong Flexible Plastic.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $59.00

Seat cover padded with blue stripes.

To suit Drifta Go Kart Seat pictured above.

Price $48.00

Seat cover padded with red stripes.

To suit Drifta Go Kart Seat pictured above.

Price $48.00

Lap belt.

2 bolting points

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $28.90

Harness 3 point seat belt.

These suit our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc).

Easy adjustable straps to suit all sizes. 3 bolting points.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Please note: yellow strapping in photo may be black

Price $49.90

Long tie rod/Steering rack with ball/rose end joints.

These suit our Drifta single seater Go Karts (excluding Junior Drifta 80cc).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes,Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

These measure 615mm eye to eye.

Price $34.90

Short tie rod/Steering rack with ball/rose end joints.

These suit our Drifta brand single seater Go Karts (excluding Junior Drifta 80cc).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

These measure 310 mm eye to eye.

Price $28.90

Left hand & Right hand tie rod ends - Rose joints

These are sold as a pair, (1 x L/H and 1 x R/H).

Size of centre hole is 10mm

Thread size is 10mm

Material: Alloy steel

Replacement parts for our short & long tie rods (steering assembly), for our single seater Drifta karts (excluding Junior Drifta Go Karts).

Price $28.90

FRONT FRAME FOR DRIFTA GO KARTS 
Suitable for Sportz Drifta, Honda Drifta, Trail Blazer and Blazer Drifta Go Karts (non-caged karts).

Please note: These frames suit our own brand Drifta Go Karts.
Please specify the serial # on your Go Kart when ordering this part. (our own Drifta Karts are LAKS.. or YKHM2019.. ) 
Available in most kart colours, please specify your colour preference when ordering or Enquire if we have in stock.

Price $95.00

FRONT FRAME FOR CAGED DRIFTA GO KARTS

Suitable for Caged Trail Blazer Drifta 200cc and Ultimate Drifta 200cc Go Karts.

Please note: These frames suit our own brand Drifta Go Karts.
Please specify the serial # on your Go Kart when ordering this part. (our own Drifta Karts are LAKS.. or YKHM2019.. ) 
Available in most kart colours, please specify your colour preference when ordering or Enquire if we have in stock.

Our roll cages attach to this front frame.

Price $98.00

These are suitable for bolting front frame to mid frame.

Sold as a pair.

ID: 15mm 

Price $2.90

Attaches behind seat to main frame of our single seater Drifta karts (non caged karts).

Price $39.90

Complete Roll Cage.

Includes padding for bars ,and black fabric sun cover (not shown in photo).

Includes built-in comfortable padded head rest.

Comes as a kitset, just need to be bolted together.

These suit our own Caged Drifta brand single seater Go Karts (excluding Junior Drifta 80cc)

(Serial # LAKS... or YKHM2019...)

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift II Go Karts, Drift Trikes, Trolley's.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $229.00

Rear frame for our Drifta single seater Go Karts.

(Serial # LAKS... or YKHM2019...)

Also suitable for other DIY projects including Drift Trikes.

If this is for one of our Drifta Go Karts please advise which model as the engine mounting differs.

Centrifugal Dry Clutch 6.5HP Engine 

Wet Clutch 6.5HP Engine 

Wet Clutch 9.0 HP Engine

Please specify colour preference when ordering.

Price $159.00

To suit swing arm on Rear Frame. (pictured above).

We have 2 sizes available. Please check the size before ordering and specify which size you require.

Size 1: Length 42mm, Outside diameter 30mm, Centre hole 10mm (HR)

Size 2: Length 45mm, Outside diameter 25mm, Centre hole 12mm (HM)

Price $9.90

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

• 6.5 HP(5Kw) Engine 200cc centrifugal dry clutch with 19mm shaft
• 4-stroke air cooled
• Recoil pull start
• Comes complete with centrifugal clutch which has 10 tooth sprocket
• Suitable for a 420 sprocket & 420 chain
• Engine manual & spark plug remover included
• GW: 14.5kg

Replacement engine for our Sportz, Caged, Honda Drifta Go Karts.

Price $399.00

The most widely used, Honda design chinese engine.

Used to power Go Karts, Grass Karts, homebuilt karts and trolley's.

New design and built strong to last.

• 6.5 HP(5Kw) Engine 200cc WET CLUTCH with 2:1 Reduction gear box.
• 4-stroke air cooled
• Recoil pull start
• Comes complete with clutch & 14 tooth drive sprocket as pictured below
• Engine manual & spark plug remover
• GW: 19kg

Replacement engine for our Trail Blazer, Blazer, Ultimate Drifta Go Karts.

Price $459.00

This Rear Axle Kit includes 1 x 880mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Axle Spacer-Short, 2 x Castle Nuts.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes,Trolley's  

Ideal for building/modifying your own Go Kart or any DIY project.

Price $295.00

To attach 6.5HP & 9.0HP engines to the mounting plate on rear frames of our DRIFTA karts.

The price is for 2.

(Sold as a pair).

Price $8.90

4-STROKE OIL FOR ENGINES & WET CLUTCH UNITS ON OUR DRIFTA KARTS

Please note: You may receive a different brand oil from what is pictured, depending on what we have available in stock.

It will be correct for the wet clutch unit.

Price $25.90

This Rear Axle Kit includes 1 x 980mm Axle, 2 x Rear Hubs, 1 x Brake Plate, 1 x Brake Hub, 1 x Chain Drive Sprocket, 1 x Chain Hub, 2 x Axle Bearings, 2 x Castle Nuts, 2 x Spacers

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts, Drift II Go Karts, Drift Trikes, Trolley's. 

Ideal for building/modifying your own Go Kart or any other DIY project.

Price $299.00

Brake Disc Plate complete with right brake hub.

High quality stainless steel plate which is 3.0mm thick.

OD is 180mm.

ID of centre hole of Brake Plate is 38mm.

Comes complete with bolts.

To suit our Drifta Go Karts, Grass Karts, Drift Trikes, Trolley's.

Ideal for any DIY project. Compatible with our Rear Axles.

Price $67.90

To suit 6.5HP engine with a Centrifugal dry clutch.

Price $4.90

To suit 6.5HP engine with a wet clutch.

Price $4.90

48 tooth 420 rear sprocket 

Chain Sprocket complete with left chain hub for Drifta Go Karts, Grass Karts,Off Road Go Karts, Drift ll Go Karts, Drift Trikes ,Trolley's.

Ideal for any DIY building project.

Compatible with our Rear Axles and chains. Chain drive sprocket is high quality stainless steel which is 6mm thick. Outside Diameter tip to tip is 198mm.

ID of centre bore is 52mm.4 hole stud pattern with distance between centre of holes 57mm.

Come complete with bolts, nuts and washers.

Price $67.90

Standard Hydraulic Brake Assembly complete with caliper, hose & brake lever.

To suit butterfly steering wheels on Drifta Go Karts.

Brake hose length 140cm from caliper to handle.

Comes complete with Hydraulic Brake Pads. (Code on Brake Pads YL-F328)

Easy to install, Just bolt on.

Compatible with our 2.5-3mm Brake Disc Plate
Please note: This brake unit is compatible with our Drifta Go Kart frames starting with LAKS.. and YKHM2019..

Suitable for Drifta Go Karts, Grass Karts, Off Road Karts, Drift ll Go Karts, Sliders, Carts, Drift Trikes & Trolley's.

Ideal for any DIY project.

Please note: These units come complete and the master cylinder & handle reservoir cannot be sold separately.

Price $72.90

To suit 5.5 and 6.5HP engines.

Price $9.90

To suit 6.5HP Motor 200cc with wet clutch.

2:1 Reduction gear box.

Price $107.90

KNOBBLY TYRE TREAD 13*5-6

BUY 4 FOR DISCOUNT.

Price $169.00

SLICK TYRE TREAD 13*5-6.

BUY 4 FOR DISCOUNT.

Price $169.00

To suit 9.0HP Motor 270cc with wet clutch.

2:1 Reduction gear box.

Price $118.90

ROAD TYRE TREAD size 13*5-6.

BUY 4 FOR DISCOUNT.

Price $169.00

Complete 6.5HP clutch with housing. 

Includes wet clutch, chain, shaft & sprocket.

Price $220.00

Complete 9.0HP clutch with housing. 

Includes wet clutch, chain, shaft & sprocket.

Price $230.00

To suit 6.5HP Motor 200cc Wet Clutch.

14 tooth sprocket.

To suit 20mm shaft.

420 PITCH.

Price $15.90

Includes steering wheel, steering column with fittings and kill switch.

Please note colour of steering wheel is now BLACK

Compatible with all our Drifta single seater Go Karts (excluding Junior Drifta 80cc Go Kart).

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Drift Trikes & Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $95.90

To suit 6.5HP Motor 200cc Wet Clutch.

14 tooth sprocket.

To suit 20mm shaft.

With key, spacer, washer, and bolt for engine shaft.

420 PITCH.

Price $21.90

Off Road Helmets. Ideal for Go-karting.

Strong thermoplastic resin shell, fully padded lining,  adjustable chin strap, gloss finish.

Selection of sizes available for children and adults.

All helmets are black, white and silver as shown in the photo.

Please Note: patterns may vary slightly to that in photo.

Price $120.00

TO SUIT MODEL KD-49FM5-E

(Steering Knuckle Pin Left) 

Height: 240mm

Arm length: 77mm

Note: This is the Connecting Arm on the Left side when sitting in the kart.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.00

 TO SUIT MODEL KD-49FM5-E

(Steering Knuckle Pin Right) 

Height: 240mm

Arm length: 77mm

Note: This is the Connecting Arm on the Right side when sitting in the kart.

To suit Explorer DriftaTwo Seater 110cc Go Kart 2015 model

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.00

TO SUIT MODEL KD-49FM5-E 

(FRONT SHOCKS)

Total length 28cm. 25cm eye to eye

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.90

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the front upper arm attachment

Width: 150mm

Length: 230mm

Suits left & right side.

Price $37.90

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the right hand side when you are sitting in the go kart.

Width: 170mm

Length: 290mm

Price $49.90

TO SUIT EXPLORER MODEL KD-110GKT-2

This is the left side when you are sitting in the go kart.

Width: 170mm

Length: 290mm

Price $49.90

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the lower swing arm assembly on the left when sitting in the kart.

Price $49.00

 TO SUIT EXPLORER MODEL KD-49FM5-E

This is the upper swing arm assembly on the left when sitting in the kart.

Price $49.00

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the lower swing arm assembly on the right when sitting in the kart.

Price $49.00

TO SUIT EXPLORER MODEL KD-49FM5-E

This is the upper swing arm assembly on the right when sitting in the kart.

Price $49.00

TO SUIT MODEL KD-110GKT-2

Left Spindle 80mm length

This is for the left hand side when sitting in the kart.

Price $59.90

TO SUIT MODEL KD-110GKT-2

Right spindle 80mm length

This is the right hand side when sitting in the kart.

Price $59.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

MODEL KD110GKT-2

Front hub 17mm x 75mm.

80mm distance between 3 x bolt holes.

Price $54.90

TO SUIT EXLPLORER GO KART MODEL KD-49FM5-E

Complete with tie rods

Total length 800mm

Tie rod length: 150mm

Please note: Steering Box for our later model Explorer Drifta is different

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $95.00

TO SUIT EXPLORER GO KART MODEL KD-110GKT-2

Complete with tie rods

Total length 940mm length

Tie rod length: 240mm

Please note: Steering Box for our earlier model Explorer Drifta is different

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $139.90

TO SUIT Steering box Model KD-110GKT-2

Steering ball head and tie rod.

Total length: 240mm

Price $39.90

TO SUIT MODEL KD-110GKT-2

This is the left hand side when sitting in the kart.

Price $24.90

TO SUIT MODEL KD-110GKT-2

This is the right hand side when sitting in the kart.

Price $24.90

TO SUIT EXPLORER GO KART MODEL KD-49FM5-E

Please note Steering column for our later model Explorer Drifta is different.

(Steering Column)

Length is 580mm

Flange diameter is 55mm.

Price $49.00

TO SUIT MODEL KD-110GKT-2  Explorer 110cc Go Kart

This is the complete assembly

Steering Shaft 470mm length 

Steering Stem 200mm length

The Steering wheel attaches to Steering stem.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts. Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $119.90

To suit Explorer Drifta Two Seater 110cc Go Karts

Outside diameter of Explorer Steering Wheel is 270mm

Distance between 3 centre holes is 35mm

Please note: metal centre piece is silver

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $79.00

1600mm THROTTLE CABLE for Explorer 110cc KD110GKT-2

This is suitable for the newer model Explorer 110cc Go Karts.

Also suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $27.90

2300mm throttle cable for Explorer 110cc KD49FM5-E.

This is suitable for the older model Explorer 110cc Go Karts which were available prior to 2016.

Also suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $28.90

Gear Shift - Reverse cable.

To suit Explorer Drifta Two Seater 110cc Go Karts.

Measures 1030mm end to end.

U-brackets on both ends.

Price $36.90

Handbrake cable for parking.

To suit Explorer Drifta Two Seater 110cc Go Karts

Total length 800mm.

Price $36.90

TO SUIT MODEL KD-49FM5-E

                            KD-110GKT-2

350mm overall length x 160mm maximum width Height 65mm

Secures with 2 x bolt holes at either end.

Distance between bolt holes is 52mm

Includes petrol tank cap 

(Please NOTE: Petrol tank tap is sold separately, listed below)

To suit Explorer Drifta Two Seater 110cc Go Karts
Suitable for Go Karts, Grass Karts, Off Road Go Karts, Go Carts.

Ideal for any DIY building project. Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.90

TO SUIT MODEL KD-49FM5-E

                            KD-110GKT-2

Fuel switch/valve to control fuel flow

Use with 6mm ID fuel hose

To suit Explorer Drifta Two Seater 110cc Go Karts
Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $14.90

Engine Type: 110cc, single cylinder, 4 stroke air cooled petrol
Power: 4.6kw/7500rpm
Max torque:6.5N.m/5500-6500rpm
Transmission: Chain drive, Three speed with reverse or Automatic with reverse

Please specify when ordering if you would like Three speed, or Automatic

Price $595.00

Replacement part for 110cc engine on our Explorer Two Seater Go Karts.

Price $79.90

TO SUIT ENGINES MODEL KD-49FM5-E and KD-110GKT-2

Intake Manifold Throat

Joint Carburetor

Diameter of Intake hole: 22mm

PCD 45mm between holes.

Price $24.90

To suit 9.0HP engine with wet clutch.

14 tooth sprocket.

To suit 25mm shaft

420 PITCH

Price $19.90

To suit 110cc engines on our Explorer Drifta Two Seater 110cc Go Karts.

Price $98.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

NGK Spark plug C7HSA

Price $15.90

To suit 9.0HP engine with wet clutch.

14 tooth sprocket with key, spacer, washer, and bolt for engine shaft.

To suit 25mm shaft

420 PITCH

Price $25.90

To suit Explorer Drifta Two Seater 110cc Go Karts.
Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $89.90

To suit 110cc engine 

Air Filter Mount: 35mm Intake

Suitable for ATV, Quads, Dirt bikes, Go Karts

Price $26.90

Exhaust muffler

To suit 5.5HP & 6.5HP engines.

Price $39.90

Exhaust muffler

Replacement exhaust for our Xtreme Drifta 270cc Go Karts.

To suit 9.0hp engines.

Please note: intake manifold is included as a separate piece, nuts to attach to the exhaust are not included.

Price $49.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Also suit our Adventurer Two seater 150cc Go Karts.

Price $89.90

TO SUIT MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta Two Seater 110cc Go Karts.

Complete with two keys

Suitable for DIY projects, ATV's, Go Karts.

Price $29.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Price $21.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Price $29.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Price $18.90

TO SUIT MODEL KD-49FM5-E

Price $30.00

TO SUIT MODEL KD-110GKT-2

Wiring 450mm length

Price $39.90

TO SUIT MODEL KD-49FM5-E

Price $22.00

TO SUIT MODEL KD-49FM5-E

Price $22.00

Silicon Rectifier

To suit Explorer Drifta Two Seater 110cc Go Karts.

Price $21.90

Engine starter motor for horizontal starter motor.  

Top mount with 3 bolts

Replacement part for Explorer Drifta 110cc Two Seater Go Karts.

Price $79.90

Replacement part for Explorer Drifta Two Seater 110cc Go Karts.

Price $27.90

Stator round - 6 coil

Separate pick up coil and square 4-pin female plug

Stator used on CT (horizontal engines with electric start).

Please specify if your Explorer go kart is KD49FM5-E or KD110GKT-2 model as the attachment pins are different.

Price $59.90

To suit Explorer 110cc Go Karts.

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Braking System Complete.

Price $69.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Strong plastic fluid cup to suit Brake master cylinder.

Price $19.90

To suit Explorer Drifta Two Seater 110cc Go Karts.

Price $195.00

Code: CD-F18A

MODEL KD-49FM5-E and KD-110GKT-2

Brake pads to suit rear brakes of Explorer 110cc Go Karts

Please check brake pads are correct before ordering

Price $16.90

Code: RH-7085

MODEL KD-49FM5-E and KD-110GKT-2

Brake pads to suit front brakes of Explorer 110cc Go Karts

Please check brake codes are correct before ordering

Price $16.90

420 pitch 30 links

To suit Explorer Drifta 110cc Go Karts.

Price $28.90

38 tooth 160mm diameter sprocket

4 x bolt holes PCD across 58mm

PCD diagonal 80mm

420 pitch

To suit Explorer Drifta 110cc Go Karts.

Price $39.90

MODEL KD-49FM5-E and KD-110GKT-2

To suit front & rear mudguard brackets

To suit both Explorer Drifta 110cc Go Kart models

145mm width x 350mm long

Price $26.90

Recoil Pull Start assembly.

To suit 5.5HP, 6.5HP & 7HP stationary engines.

Measures 175mm diameter. Mounting bolt holes at 160mm PCD.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

Price $36.90

To suit all our Explorer Drifta 110cc Go Karts

To attach mudguard

This is the left side when sitting in the go kart.

Price $29.90

To suit all our Explorer Drifta 110cc Go Karts

To attach mudguard

This is the right side when sitting in the go kart.

Price $29.90

Recoil Pull Start assembly.

To suit 9.0HP stationary engine

To suit engines on our Xtreme Drifta 270cc Go Karts.

Price $46.90

TO SUIT MODEL KD-110GKT-2 only

Bracket/Arm to attach front mudguard

This is the LEFT hand side when sitting in the kart.

Price $34.90

TO SUIT MODEL KD-110GKT-2 only

Bracket/Arm to attach front mudguard

This is the RIGHT hand side when sitting in the kart

Price $34.90

MODEL KD-49FM5-E and KD-110GKT-2

To suit rear wheels

To attach mudguard

This is compatible with both Explorer Drifta 110cc models 

This is the LEFT hand rear side when sitting in the kart

Price $29.90

MODEL KD-49FM5-E and KD-110GKT-2

To suit rear wheels

To attach mudguard

This is compatible with both Explorer Drifta 110cc models 

This is the RIGHT hand rear side when sitting in the kart

Price $29.90

To suit Explorer Drifta Two Seater 110cc Go Karts

MODEL KD-49FM5-E and KD-110GKT-2

Includes sprocket mount & brake hub mount

Total length is 880mm. Spline length 45mm. 19 splines.

Suitable for Go Karts, Grass Karts, Off Road Go Karts, Trolley's.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $159.00

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta 110cc Go Karts

Brake Rotor

OD: 115mm

ID: 40mm

Thickness: 3mm

Holes PCD 50mm

35mm

Price $36.90

MODEL KD-49FM5-E and KD-110GKT-2

To suit Explorer Drifta Two Seater 110cc Go Karts

3mm thick

Diameter 180mm  

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $39.90

These are FRONT and REAR shocks for Explorer Drifta 110cc Go Kart model KD-110GKT-2 (blue kart image)

These are the REAR shocks only for Explorer Drifta 110cc Go Kart model KD-49FM5-E (red kart image)

Total length 345mm

Eye to Eye 320mm

Suitable for Go Karts, Grass Karts, Off Road Go Karts.

Ideal for any DIY building project.

Ideal if you are modifying your kart, home-built karts or other projects.

Price $69.90

MODEL KD-49FM5-E and KD-110GKT-2

With spline

4 x stud pattern

10mm Bolt holes

To suit Rear rims and tyres 16*8-7

Price $44.90

To Suit Explorer Drifta 110cc Go Karts

Code: 6205

ID 25mm

OD 52mm

Width 15mm

Double sealed

Rubber seals

This is the price for 1 bearing.

Price $17.90

To suit Explorer Drifta 110cc Go Karts - Front Wheel

Size 145/70-6

Tubeless

Price $99.90

To suit Explorer Drifta 110cc Go Karts - Rear wheels

Size 16*8-7

Tubeless

Price $109.90

To suit front wheels of Explorer 110cc Go Karts

6" Rim to suit 145/70-6 tyres

3 stud

10mm bolt holes

PCD 80mm

172mm diameter x 100mm width

Price $39.90

To suit rear wheels of Explorer 110cc Go Karts

7 " Rim to suit 16*8-7 tyres

4 stud

10mm bolt holes

PCD 80mm

200mm diameter x 135mm width

Price $49.90

To suit Explorer Drifta 110c Go Karts - Front tyre

Size 145/70-6

Please note tread pattern may differ.

Price $69.90

To suit Explorer Drifta 110cc Go Karts -Rear Tyre

Size 16*8-7

Please note tread pattern may differ.

Price $79.90

Fuel Cap

To suit 5.5HP, 6.5HP engines.

Price $15.90

Fuel Cap

To suit 5.5HP, 6.5HP engines.

External metal thread.

Price $15.90

To suit 5.5HP, 6.5HP engines.

Fuel tank capacity: 3.6L

Dimensions: 210mm x 250mm width x 100mm height

Price $52.00

To suit 9.0 HP 270cc engines.

Fuel tank capacity: 4.75L

Dimensions: 240mm x 270mm width x 150mm height

Please note: Image displayed is 6.5HP petrol tank.

Price $64.00

Carburetor for 6.5HP engine.

Throat size 19mm & 42mm centres for mounting bracket.

To suit engines on our Drifta single seater Go Karts (excluding Junior Drifta Go Kart).

Price $55.90

Carburetor for 9.0HP engines.

To suit our Xtreme Drifta 270cc go Kart engines.

Price $84.90

NGK Spark plug BKR6E

To suit all our single seater 200cc Drifta Karts, excluding Junior Drifta 80cc.

Price $13.90

80cc 4-STROKE ENGINE with recoil pull start.

To suit our Junior Drifta 80cc Go Karts.

1.2 litre fuel tank

2.5HP

Air cooled

Complete with Centrifugal Clutch.

Price $399.00

9.0 HP stationary petrol engine.

To suit our Xtreme Drifta 270cc Go Karts.

Delivers strong power and torque

Measurements of engine: 

Length 420mm

Width 300mm

Height 420mm

Shaft diameter 25mm

Shaft length 64mm

Product features:

• Complete with wet clutch
• Air cooled, 4-stroke OHV
• Recoil pull start
• 6 litre tank
• Bore & Stroke 77 & 58mm
• Displacement 270cc
• Max power 6.6kw at 3600rpm
• 1.1 litre oil capacity

GW: 31kg NW: 29kg

Price $695.00

Genuine Honda Engine GX160.

Air cooled 4-stroke OHV.

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

Price $695.00

OUT OF STOCK

Genuine Honda Engine GX200

Air cooled 4-stroke OHV

Recoil Pull start

Complete with Clutch

Bore & Stroke 68 & 54mm

Price $695.00

Replacement Centrifugal clutch to suit engine on our Junior Drifta 80cc Go Karts.

Also suits our Classic Junior 80cc Mini Bike engines.

11 tooth sprocket.

15mm shaft 3/8

Price $69.90

Replacement Centrifugal clutch to suit engines on our Classic Junior 80cc Mini Bike engines. 

Also suits our Junior Drifta 80cc Go Karts.

11 tooth sprocket.

15mm shaft 3/8

Price $69.90

Replacement Centrifugal clutch to suit engines on our Classic 105cc Mini Bike engines. 

12 tooth sprocket.

15mm shaft 3/8.

Price $69.90

Replacement clutch spring for centrifugal clutch (80cc engine).

To suit our Junior Drifta 80cc Go Karts and Classic Junior 80cc Mini Bike.

Price $12.90

Replacement clutch spring for centrifugal clutch (80cc & 105cc engines).

To suit our Junior Drifta 80cc Go Karts and Classic Junior 80cc & 105cc Mini Bikes.

Price $12.90

Carburetor to suit 3.5HP, 80cc engines. 

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

Price $65.90

Carburetor to suit 2.5HP, 80cc engines. 

To suit our Classic Junior 80cc Mini Bikes and Junior Drifta 80cc Go Kart.

Price $65.90

Carburetor to suit 3.5HP, 105cc Mini Bike engines. 

Replacement part for our 105cc Classic Mini Bikes.

Price $65.90

NGK Spark Plug BM6A

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc & 105cc Mini Bikes.

Price $12.90

NGK Spark Plug BM6A

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc & 105cc Mini Bikes.

Price $14.90

Pull start to suit 3.5HP, 80cc engines.

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

Diameter 150mm.

Price $44.90

Pull start to suit 2.5HP, 80cc engines.

To suit our Junior Drifta 80cc Go Kart, and Classic Junior 80cc Mini Bike.

Diameter 150mm.

Price $44.90

Pull start to suit 3.5HP, 105cc engines.

To suit our Classic 105cc Mini Bike.

Diameter 150mm.

Price $44.90

Air Filter to suit Junior Drifta 80cc engines.

Also suits Classic Junior 80cc Mini Bikes.

Price $29.90

Air Filter to suit Classic Mini Bike 80cc & 105cc engines.

Also suits Junior Drifta 80cc Go Karts.

Price $29.90

Steering Tie Rod to suit our Junior Drifta 80cc Go Karts.

These measure 260mm eye to eye.

Price $32.90

These goggles are ideal for go karting, motocross, snowboarding, skiing.

Adjustable elastic head strap, soft padded lining beneath rims, plastic scratch resistant lenses.

One size fits all.

Please note plastic is clear, not reflective

Price $22.00

Steering shaft to suit our Junior Drifta 80cc Go Kart.

Total length of shaft is 440mm.

Price $32.90

Steering wheel connection holder to suit our Junior Drifta 80cc Go Karts.

Length is 100mm

65mm flange

3 holes on flange 30mm apart

This fits inside steering shaft to attach steering wheel.

Price $19.90

To suit our Junior Drifta 80cc Go Karts.

Price $24.90

Throttle cable  to suit our Junior Drifta 80cc Go Karts.

1440mm length

Price $26.90

Throttle/accelerator cable  to suit our Classic Junior 80cc & 105cc Mini Bikes.

Total length of cable: 1.4m

Length of black outer casing: 1.2m

M10mm thread to connect to Minibike Throttle assembly.

Price $24.90

Replacement brake cable to suit our Classic 80cc & 105cc Mini Bikes.

Total length of cable: 1.4m

Length of black outer casing: 1.28m

Ideal for any DIY building project.

Price $19.90

To suit our 80cc & 105cc Minibikes.

Complete with brake pads.

Mechanical brake unit.

Mount holes:50mm centre to centre with 5mm thread.

Price $35.90

To suit our 80cc & 105cc Minibikes.

High quality stainless steel plate 2.5mm thick.

OD is 180mm.

ID of centre hole: 38mm

Price $35.90

Hydraulic brake unit complete  to suit our Junior Drifta 80cc Go Karts.

This unit is complete and just needs to be attached to kart

Total length of brake unit is 1460mm

Please note: Actual brake hose from Junior Drifta is black colour, and hydraulic fluid is in a plastic container, slightly different from the image pictured.

Price $85.90

Disc Brake plate  to suit our Junior Drifta 80cc Go Karts.

160mm diameter 2.5mm thichness

Centre hole 30mm diameter

6 stud holes, distance between stud holes is 20mm.

Price $34.90

Transmission chain large  to suit our Junior Drifta 80cc Go Karts.

41 links

Price $26.90

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: Recommended maximum weight- 120kg
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,695.00

OUT OF STOCK

Features:

Engine: Honda design, single cylinder, air cooled 4-stroke
Displacement: 200cc
Power: 6.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch type: Wet clutch with 2:1 reduction gear box
Tyres (Front/Rear): Off road chunky tyres 145/70-6
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max speed: 45-50km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 85kg, gross weight - 95kg
Packaging dimensions: 115cm L x 98cm W x 55cm H
Assembled dimensions: 98cm Width x 163cm Length x 135cm Height

Price $1,695.00

Transmission chain small to suit our Junior Drifta 80cc Go Karts.

25 links

Price $19.90

Drive chain to suit our Classic Junior 80cc & 105cc Mini Bikes.

67 links

35 pitch

Price $28.90

To suit our 80cc & 105cc Mini bikes.

Complete with 2 bearings.

8mm bolt inner hole

Diameter: 44mm

Roller width: 33mm

Inner guide: 15mm

Price $25.90

Rear chain sprocket to suit our 80cc & 105cc Minibikes.

75 tooth 

35 pitch

OD: 230mm

Centre hole ID: 38mm

Price $39.90

Drive sprocket large to suit Junior Drifta 80cc Go Karts.

200mm diameter

65 tooth

25mm centre hole

Price $39.90

Features:

Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,695.00

Drive sprocket medium to suit Junior Drifta 80cc Go Karts.

125mm diameter

40 tooth

25mm centre hole

Price $36.90

Drive sprocket small to suit Junior Drifta 80cc Go Karts.

75mm diameter

24 tooth

Price $44.90

Rear axle shaft to suit our Junior Drifta 80cc Go Karts.

Total length is 750mm

Diameter is 25mm in centre, tapers to 20mm

135mm to first step

Axle is keyed (Not splined)

Price $79.90

Features:

Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,695.00

Lap seat-belt to suit our Junior Drifta 80cc Go Kart.

2 bolting points.

Price $28.90

To suit our Junior Drifta 80cc Go Kart.

Strong HDPE material.

Approx 420mm across x 440mm height

Mounting holes width: 230mm across

Front to rear holes: 250mm.

Price $79.00

Front wheel rim to suit Junior Drifta 80cc Go Kart.

Complete with 15mm bearing

To suit 13*5.00-6 tyres

170mm Diameter x 98mm Width

Price $45.90

Rear wheel rim to suit Junior Drifta 80cc Go Kart.

Complete with keyway

To suit 13*5.00-6 tyres

170mm Diameter x 98mm Width

Price $45.90

OUT OF STOCK

Features:
Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,695.00

Front tyre & rim complete with bearings to suit Junior Drifta 80cc Go Karts.

Knobbly tyre tread

Price $75.00

Rear Tyre & rim complete with spline to suit Junior Drifta 80cc Go Karts.

Knobbly tyre tread

Price $75.00

Features

Engine: Genuine Honda Single cylinder engine GX160, air cooled 4-stroke,
Displacement: 163cc
Power: 5.5hp
Drive System: Direct drive axle
Suspension: Swing-arm suspension
Starting system: Recoil Pull start
Clutch Type: Centrifugal dry
Tyres: 6" knobbly pneumatic
Brake System: Rear hydraulic brake
Fuel Tank Capacity: 3.6 litre
Distance on full tank: 75km
Max Speed: 45 km/h
Fuel type: Unleaded petrol
Pay load: (recommended maximum weight- 120kg)
Packaging: net weight - 75kg, gross weight 85kg
Packaging Dimensions: 108cm L x 98cm W x 52cm H
Assembled dimensions: 163cm Length x 93cm Width x 74cm Height

All karts have been upgraded to include leg and foot protector, padded coloured seat cover and 3-point safety harness.

Price $1,695.00

To suit our Junior Drifta 80cc Go Kart and Classic 80cc & 105cc Mini Bikes.

Cable length 163cm

Ideal for any DIY building projects.

Ideal if you are modifying your kart, home-built karts or other projects. 

Price $25.00

To suit our Junior Drifta 80cc Go Kart and Classic 80cc Mini Bike

Cable length 163cm

Ideal for any DIY building projects.

Ideal if you are modifying your kart, home-built karts or other projects. 

Price $25.00

To suit 80cc and 105cc engines.

Diameter of thread 40mm.

Price $14.90

Replacement spring for kickstand for our Classic Junior 80cc & 105cc Mini Bikes.

Price $8.90